Close this search box.



Arduino Projects (200+)
Electronics Projects (250+)
Mini Project Circuits (160+)
Mini Project Ideas (150+)
ECE Projects (150+)
EEE Projects (150+)
8051 Projects (110+)
Raspberry Pi Projects (101+)
Electrical Project Ideas (100+)
Embedded Projects (100+)
Latest Electronics Ideas (100+)
Microcontroller Mini Projects (100+)
Robotics Projects (100+)
VLSI Projects (100+)
Solar Projects (100+)
IOT Projects (100+)

Communication Projects (70+)
LED Projects (70+)
Power Electronics Projects (60+)
RFID Projects (60+)
Home Automation Projects (50+)
Matlab Projects (50+)
EIE Projects (50+)
Wireless Projects (50+)
LabView Projects (45+)
Zigbee Projects (45+)
GSM Projects (40+)
555 Timer Circuits (40+)
Sensor Projects (40+)
ARM Projects (60+)
DTMF Projects (30+)
PIC Projects (30+)
Electrical Mini Projects (25)
ESP8266 Projects


This circuit is low cost and can be constructed easily. By using this circuit, we can control any house hold appliance with the help of

We know that bugger is a device which gives the information of one person to other person in the remote location. Normally bugger is used

Jammer Circuits: In olden days while we were using analog signal for communication, the jamming circuit was very easy just by producing the high frequency

This session completely deals with the interfacing AVR microcontroller (ATMEGA 16) with 16X2 LCD. The Atmega16 belongs to the AVR microcontroller family. [adsense1] Circuit Diagram

The battery is charged with small amount of AC voltage or DC voltage. So if you want to charge your battery with AC source then

Multivibrator is an electronic circuit which will work as two stage amplifier operating in both stable and astable mode.In the multivibrator the output of first

In this session we will see how to interface 16×2 LCD to PIC18F4550 microcontroller which is of family PIC18F. You can get information of 16×2

Introduction: While parking the car the driver should be more careful because he cannot see the back of the car while parking or taking reverse,

What is Amplifier Amplification is a process of increasing the signal strength by increasing the amplitude of a given signal with out changing its characteristics.

Here I’m discussing about the circuit that which we can uses in different ways to produce signals. In this we are observing that there are