How To Fix iPhone Black Screen of Death Issue?

Are you frustrated with the infamous black screen of death issue on your iPhone? It is a nightmare when your iPhone’s screen remains stubbornly black, leaving you unable to use it. But fear not! In this article, we will explore the causes behind this frustrating issue and provide you with effective solutions to fix the iPhone black screen problem. Drawing upon personal experiences and expert knowledge, we will guide you through the steps to review your iPhone and recover your valuable data. Let us dive in and conquer the black screen of death together.

What Causes an iPhone Screen to go Black?

These are Some Reasons for iPhone Black Screen of Death Issue: 

1. Hardware Issue

One of the Main Common Problems for the iPhone Black screen death is Hardware issues. Components between the screen and the motherboard are particularly susceptible to damage in such situations. This can result in a black screen or complete failure to turn on. 

The Problems that occur in hardware are Impact-related Hardware Issues, Connectivity-related Hardware Issues, Power-related Hardware Issues. These three versions of hardware problems in iPhones highlight the impact-related issues caused by drops and vibration, connectivity-related problems between internal components, and power-related issues such as drained or malfunctioning batteries.

2. Software Issue

If You don’t Find any issue in hardware. Then, it is a software issue. The Issue Comes in the Display Are App Compatibility Issues, Firmware Update Failures, iOS Bugs or Incompatibilities, iPhone storage full, dead battery, screen Break. These could lead to iPhone Black Screen.

Up To Now, You Know What Causes Your iPhone Screen to Turn Black. From Here I will explain How to Fix the iPhone Black Screen of Death Issue.

How To Know iPhone Black Screen of Death?

Solution1: Dead Battery

The iPhone is powered by a rechargeable lithium-ion battery that provides the necessary energy for the device to function. Over time and with regular use, the battery’s capacity gradually diminishes, resulting in decreased battery life. Eventually, the battery may become incapable of supplying sufficient power to the iPhone, leading to various issues, including the Black Screen of Death.

How to fix: Charge the iPhone Connect your iPhone to a power source using the original charging cable and adapter. Before Ensure that the charging cable and adapter are in good condition and functioning properly. Let it charge for at least 15-30 minutes, and then attempt to power it on. If the battery was drained, the iPhone should start up normally. If the above steps don’t work, it might be necessary to replace the iPhone’s battery.

Solution 2: App Problem       

a) Identifying App Malfunctions:

One possible cause of the black screen issue is a malfunctioning app. Not all apps are created equal, and compatibility issues with your iPhone’s current software can lead to a screen malfunction. To tackle this, Follow these steps:

• Swipe up or press the home button twice (if available) to view all open apps.
• Swipe up on the recent apps to identify the problematic one and close it.
• Once the app is closed, Your screen regains its responsiveness.

b) Troubleshooting a Problematic App:

In this case, the black screen issue occurred immediately after launching a specific app. This suggested that the app itself was causing the problem. Here’s How to resolve it:

• Quickly press the ‘Home‘ button twice to access the app switcher.
• Swipe left or right to find the app causing the issue and close it by swiping it away.
• Press the ‘Home‘ button again to return to the home screen.
• Finally, relaunched the app to check if the problem was resolved.

c) Dealing with Frequent App Crashes:

Sometimes, certain apps can frequently crash, leading to the black screen issue. When an app is not properly optimized, it may only display a black screen upon opening. Here’s what to do in this scenario:

• Check if it could invoke the app switcher by swiping up or pressing the home button twice.
• Force quit the apps that it suspected might be causing the issue.
• After force quitting the apps, opened them again to check if the black screen problem was resolved.

Solution 3:  Go For Force Restart

If it is a software issue, force restarting your iPhone should get the job done. Perhaps the running app has crashed or the background process has crashed, the only solution is to force restart your iPhone so that the app or the process gets terminated and restarted again. Here are the steps to force restart your iPhone.

• Tap Volume Up button and release it quickly.
• Tap Volume Down button and release it quickly.
• Hold Side button till you get the Apple logo on your screen. For the logo to appear, it may take 10 to 20 seconds depending on the crash.

When your iPhone restarts, you can get rid of any app that caused the crash so that it never occurs again. You can even update the app in case the issue is fixed in the new version.

Alternatively, you should charge your device and then go for force restart. This is because when the screen goes black, you cannot see the charge percentage. If the charge is low, the screen can blackout completely.

In fact, if the charge is zero, the phone will not turn on, and the screen will be black. Therefore, at least charge your device for 30 minutes and then force restart. If you connect the charger and the iPhone is not showing any indicator light of its charging status, you should force restart the device while it is plugged in and then let it charge as normal.

Solution 4: Restore Your iPhone with iTunes

If you have tried out the previous solution and it is not working on your iPhone, you have to go for iOS restore your iPhone through iTunes. It is an advanced solution, and it should only be carried out when the problem is complex, and every other solution fails. It solves any issue arising from app, firmware, and even malware.

You will need a computer or Mac with iTunes installed. In fact, you should do it where you generally take backup. Connect your iPhone to your computer through lightning cable and

here are the steps to follow to restore your iPhone in recovery mode.

• Tap and release Volume Up button.
• Tap and release Volume Down key.
• You will see Connect to iTunes screen Tap and hold Side button and don’t release til you get the Apple logo on the screen.
• Your device has entered into Recovery mode, and you will see Restore and Update option on your computer screen. If the update option is available, click on it so that your device gets the latest iOS version.
• Otherwise, go to Restore option and wait patiently for the restoration process to finish.

Note that your iPhone data will not be erased. At times, the downloading process could take more time than usual, and your device may exit the connection to iTunes. In that case, you have to reconnect by following all the steps mentioned above.

Solution 5: Go For DFU Restore

If Recovery mode restore has not worked on your iPhone, the next option you have is DFU mode restore. It is not recommended as you can brick your iPhone if anything goes bad. That is why you should avoid the step if you are not confident. However, if you want to go for it, here are the steps.

• Restart your computer and start afresh. Connect your iPhone to your computer with a lightning cable.
• Tap and hold Side button and while holding, press and hold Volume Down button. If you see Apple logo, this means you have failed and you have to release all buttons and start over again.
• If you do not see Apple logo, release Side button but hold on to Volume Down button.
• Once you see on iTunes a message that it has detected your iPhone, you can release Volume Down button, and you have to follow on-screen instructions to finish DFU mode restoration process.

Note that if you see Plug into iTunes message on your screen, this means it is not in DFU mode. You have to start over again. Let us repeat again that you can get the job over with an Apple expert who has done DFU mode instead of you trying it out for the first time.

Solution 6: Repair Your iOS System

Software update corruption or unknown iOS errors may bring the black screen to your iPhone for a while or for good. If you’ve reviewed all the above suggestions and none worked, it’s time for you to test some advanced third-party iOS system repair tools such as the EaseUS iOS System Repair.

There are two system repair modes available:

• Standard Repair: Retain data and reset the device
• Deep Repair: Erase data and update the device

Either mode will ask you to enter your iPhone into Recovery Mode first, and the software interface displays the user guide on how to put your iPhone, iPad, or iPod in Recovery Mode so you can hardly get lost. Since the black screen issue is usually troublesome and the causes are sophisticated, we recommend using Standard Repair mode before the Deep Repair for minimal data loss. But with our personal experience in diagnosing the iPhone dead issue displaying a black screen over the last ten years, chances are that the deep repair way is more beneficial.

Step 1

Navigate to “System Repair” > “iOS/iPadOS System Repair” > “Deep Repair”.

Step 2

Follow the instructions to put your iPhone in Recovery Mode correctly.

Step 3

Select the iOS firmware version from the drop-down list and click “Repair”.

Step 4

Confirm the operation by typing 123456 on the screen checkbox and clicking “Continue”.

Step 5

Wait patiently until the complete window shows up.

Solution 7: Finally, Contact Apple Store

If none of these steps resolved the issue, realize that there might be other underlying causes for the black screen problem. In such cases, it’s recommended to seek professional help or contact Apple support for further assistance.

Conclusion

iPhone black screen of death can be due to software as well as hardware issue. Considering software issue, we have provided the solutions. You should try them out before concluding that the issue is due to hardware. In that case, you have to visit an Apple store or an Apple technician to replace the screen or fix the dislodge issue.