Search
Close this search box.

Home

The 7 Best Biscuit Joiner Reviews and Buying Guide

A biscuit joiner (or plate joiner) is an essential woodworking tool used for joining two wood pieces together with the help of glue and wood biscuits. It creates a stronger connection, offers more convenience and efficiency than any other alternatives.

With its circular saw type blades, this joiner cut slices into two wood pieces and insert a wood biscuit in these two slots to create a strong joint. Here the glue-applied biscuit will lock these two boards well-organized and thereby create a strong joint.

Looking to purchase a biscuit joiner for your domestic or professional usage, then consider the following key points.

  • Power Source –Usually, there are corded and cordless forms of power sources available for biscuit joiners.
  • Corded: Mostly, woodworking projects/pros use corded versions. The reason is that they are powerful and can easily cut through the toughest wood. Limited cord length and continuous power supply are its main drawback.
  • Cordless: These are a compact and handy tool used in projects like kitchen remodels, where you can use them anywhere without any cord. Limited working/battery runtime is its main drawback.
  • Speed –The power of a joiner is measured in amperage rating, which refers to the current load a motor can handle for its proper functioning. And the ideal power range will be 5 – 7 amps. Also, speed matters while operating the joiner. The faster motor will spin the blade quickly to cut the biscuit slot. So, check out the models with a speed range of 8000 – 10000 RPM.
  • Biscuit Size –The joiner uses biscuits (glue-covered) to join workpieces together, and these biscuits come in various sizes (#0 – small, #10 – medium, & #20 – large). Most joiners come with settings to adjust different sized biscuits for either shallower or deeper cuts. For instance, a big biscuit is needed while making countertops and bookshelves, whereas a small biscuit fits in a cabinet frame.

Read on to our detailed “Buying Guide” to know what factors/features to consider while shopping for the biscuit joiner. Also, we have enlisted some of the best-selling biscuit joiner models to help you pick the right one easily, as per your working requirement.

Best Biscuit Joiner 2023: Tabultion

Biscuit JoinerPower typePower ratingWarrantyBuy Now
Dewalt Biscuit JoinerCorded6.5 amp3 yearsCheck On Amazon
Rexbeti Biscuit JoinerCorded8.5 amp-Check On Amazon
WEN Biscuit JoinerCorded8.5-Amp--Check On Amazon
AOBEN Biscuit JoinerCorded8.5 Amp--Check On Amazon
Porter-Cable Biscuit JoinerCorded7 amp3 yearsCheck On Amazon
Vonhaus Biscuit JoinerCorded8.5 amp1 yearCheck On Amazon

7 Best Biscuit Joiner Reviews

1. Dewalt Biscuit Joiner

Dewalt plate joiner

Dewalt is a reputed brand that produces top tier power tools. Amongst other affordable power tools, they also make biscuit joiners.

At the number 1 position, we have the Dewalt plate joiner. It is a corded biscuit joiner that has a 6.3 amp motor that is more than enough to work on general softwoods. The maximum rotation per minute rating of the motor is 10000 rpm. You get an adjustable fence with it that can be adjusted from 0 degrees to 90 degrees according to your requirement. Talking about the design, there is a dual rack and pinion fence arrangement that allows proper contact between blade and fence. This provides more accurate joints.

The maximum depth of cut that can be managed with this tool is 20 mm. Therefore, you can use 0, 10, or 20 size biscuits with the Dewalt plate joiner. The overall weight of this biscuit joiner is 6.6lbs. Along with the tool, you will get a carbide blade, a dust bag, a vacuum adapter, and adjustment tools. There is a 3-year limited warranty available that makes it a highly reliable product.

Best Features:

  • 6.3 amp motor
  • 10000 rpm rating
  • Adjustable fence
  • Dual rack and pinion fence
  • 20 mm maximum depth of cut
  • 6.6 lbs in weight
  • 3 years warranty

Pros:

  • Innovative design
  • Lightweight biscuit cutter

Cons:

  • The dust bag is small
  • Noisy operation

Buy Now From Amazon

2.  Rexbeti Biscuit Joiner 

rexbeti

Rexbeti is yet another brand that makes affordable power tools. Fortunately, they also have a cheap biscuit joiner in their line up.

Rexbeti biscuit plate joiner kit is a powerful biscuit joiner that has an 8.5 amp motor that is capable of 10000 rpm. You can cut up to 14mm of wood with this machine without any problem. You get an adjustable fence that can be varied between 0 degrees to 90 degrees. You also get 70 pieces of 20 size, 20 pieces of 10 size, and 10 pieces of 0 size biscuits for free along with the tool.

It has a 4 inches diameter blade that can be utilized for all general applications such as miter joints, corner joints, nutt joints, and T joints. It has an ergonomically designed handle that will favor you while operating the tool to get accurate results. You also do not have to worry about the dust as it comes with a dedicated dust extraction port and a dust collection bag. It weighs 7 lbs, which is common in the biscuit joiners.

Best Features:

  •  8.5 amp motor
  • 10000 rpm rating
  • 14mm depth of cut
  • Adjustable fence
  • Free biscuits
  • 7 lbs in weight
  • Ergonomic design

Pros:

  • Free biscuits included with the product
  • Affordable price tag

Cons:

  • Build quality is comparatively poor

Buy Now From Amazon

3. WEN Biscuit Joiner  

WEN Biscuit JoinerThe WEN Plate and Biscuit Joiner is a strong tool that makes your woodworking projects better. It is perfect for anyone who works with wood, because it has great features and is well-made. It has a powerful 8.5-amp motor that runs at a speedy 10,000 RPM. This strong motor does many woodworking tasks, like joining and aligning wood pieces.

The 4-inch blade cuts wood, making slots for your biscuits, and the adjustable fence lets you tailor your work. This feature makes it easy to put in biscuits and ensures your joints fit together perfectly and securely every time. It comes with a strong case to store it in.

Best Features:

  • 5-amp motor
  • 10,000 RPM
  • 4″ blade
  • Adjustable fence
  • Preset stops for #0, #10, and #20 biscuits
  • Sturdy case and biscuits included

Pros:

  • Powerful motor for versatile woodworking tasks
  • Adjustable fence for customization
  • Preset stops for easy biscuit insertion
  • Durable storage case included
  • Suitable for both beginners and professionals

Cons:

  • The blade may need occasional replacement
  • May be relatively heavy for some users

Buy Now From Amazon

4. AOBEN Biscuit Joiner 

AOBEN Biscuit JoinerAOBEN 8.5 Amp Biscuit Cutter Plate Joiner is a strong and versatile tool for woodworking. This tool has a powerful 8.5 Amp motor that cuts even the hardest wood with accuracy and speed. It can make many different types of joints, like corners, frames, and more. This joiner special is that it has a tilt fence that you can adjust to cut at different angles, from flat to upright. 

The ready-to-use biscuit sizes (0, 10, 20) make it super easy to set up. your cuts will always be the same and very accurate. It has a strong 4-inch blade, that cuts at   fast 11,000 times per minute, and makes a groove that is 5/32-inch wide.

Best Features:

  • Powerful 8.5 Amp motor
  • Versatile joint cutting
  • Adjustable tilt fence
  • Pre-set biscuit sizes
  • Dust bag included

Pros:

  • Cuts through tough wood
  • Suitable for various joints
  • Easy angle adjustments
  • Convenient setup
  • Keeps workspace clean

Cons:

  • May be relatively heavy
  • Requires a power source

Buy Now From Amazon

5. Porter-Cable Biscuit Joiner

porter cable

Porter is a well-known brand that is providing quality products for over 100 years. They have a wide range of power tools, including this joiner.

Our 3rd pick for best biscuit joiner available for you is the Porter Cable 557 plate joiner kit. Consider this as an all in one package as it has almost all the major features of an ideal biscuit joiner. The motor power on this biscuit joiner is 7 amp, and it runs at 10000 rpm. You also have 7 different settings to control the speed. Unlike other joiners, you can operate even on a 135-degree angle because of the adjustable fence.

The blade size on Porter Cable 557 is 4 inches, which is needed for general wood cutting. Although, you can also manage to put a 2 inches blade if you require. It weighs around 7.65 lbs that is perfect for both professional and general use. You will get 2 different blades, a centering plate, a spanner wrench, a dust bag, and a chip deflector along with the tool for no extra cost.  There is a long 3 year warranty period on the biscuit joiner.

Best Features:

  • 7 amp motor
  • 10000 rpm rating
  • Adjustable fence
  • 7 different speed settings
  • 0 to 135-degree blade angle
  • 7.65 lbs in weight
  • 3 years warranty
  • Adjustable blade

Pros:

  • Adjustable speed
  • Multiple blades supported

Cons:

  • Initial setup is tedious
  • Comparatively expensive

Buy Now From Amazon

6. Vonhaus Biscuit Joiner

VonHaus

Vonhouse is a brand that is capable of making high power tools at a very budget-friendly price. Luckily, they have a biscuit joiner in their list of power tools.

As you would expect from Vonhouse, this biscuit joiner provides a massive 8.5 amp motor that runs at 10000 rpm on a very cheap price tag. There are only two locks available on the fence that are 0 degrees and 90 degrees. It has a 4 inches diameter blade that is essential for standard wood cutting operations. You can adjust the depth at 0, 10, or 20 sizes that is similar to the biscuit size supported by this tool.

While operating, you wouldn’t have to worry about all the dust as it contains a dust collection port and a dust collection bag to maintain cleanliness in the work area. The overall weight of the Vonhouse biscuit joiner is 7.4 lbs, and there is a 1 year of warranty.

Best Features:

  • 8.5 amp motor
  • 10000 rpm rating
  • Adjustable fence
  • 4 inches blade size
  • Adjustable depth angle
  • 7.4 lbs in weight
  • 1-year warranty

Pros:

  • Powerful motor
  • The very cheap price tag

Cons:

  • Does not have rack and pinion fence
  • Noisy operation

Buy Now From Amazon

How To Choose The Best Biscuit Joiner

In this buying guide, we are providing the essential information that helps you a lot in making the right decision. Here are the factors that have to be taken into account when choosing the best biscuit joiner.

Let’s get into its details.

1. Power Source

The power source of biscuit joiners will be available in two forms – corded and cordless. It is an essential feature to consider for those convenience matters a lot.

  • Corded Biscuit Joiner – Mostly, these biscuit joiner models are available in corded versions. Generally, these woodworking projects are done in the workshop, where power is readily available to operate all these power tools. We all are aware that corded ones offer more power in their motor and can easily cut through the toughest wood. The main advantage of these corded models is that they work continuously till they are connected to a power source. While the main drawback is its limited cord length.
  • Cordless Biscuit Joiner – Most biscuit joiner manufacturers won’t dive to cordless versions due to their tax on batteries. So, there are only a few models of cordless biscuit joiners comes in the market. They are quite handy to use in kitchen remodelling projects, where it requires joining two segments of wood countertops without the usage of any cord. The main advantage of this model is that they are compact, portable, and can work in any place till they are fully charged. While its main drawback is its limited working hours based on its battery capacities.

2. Speed and Power

Biscuit joiners are determined power tools that offers plenty of speed and power and tough parts. However, it won’t consume much power to drag a hole in cedar or pine. But it is vital to check the power-related feature called amperage rating before making its purchase.

Amperage defines the current load a motor handles before its parts fails while operating. Since it depends on the quality of all those distinct components inside the device and how it cools itself when operating. Preferably, we need a biscuit joiner model with power range of 5 – 7 amps.

Speed matters a lot while doing the actual work done. It means, the faster motor will make the blade spins faster and thereby cut the biscuit slot effectively. So, check out the models with 8000 – 10000 rpm ratings for general purposes.

3. Biscuit Size

The main purpose of biscuit joiners is to use biscuits for joining workpieces together. While inserting a glue-applied biscuit into a slot, which locks and joins two pieces of wood into a single piece. Usually, biscuits are available in different sizes like small (#0), medium (#10), and larger sizes (#20) respectively.

Most biscuit joiners offer settings, which allow accommodating different sized biscuits to adjust for shallower or deeper cuts – some cuts depth as 3/4 inches, while other models need changing blades. However, biscuit size is not a feature while choosing this joiner, yet essential to work. For instance, countertops and bookshelves need lots of glueing surfaces and a larger biscuit. Whereas, a small biscuit may fit properly in the cabinet face-frame.

Remember that having your own biscuits supply will help a lot. If you won’t have any, then buy a model offering a good supply of these biscuits. In case, if you are unsure about its size, then use the possible largest biscuit. Here the bigger biscuit will make the joint much stronger.

4. Blade Material

In general, the usage of circular saw blades in the joiner models, which are a bit unlike than blades you will notice in a table, circular or miter saw. Its blade is thicker having smaller diameter and fewer teeth.

Digging a spin blade into thick hardwoods again will build up a lot of pressure and heat on the blade. So, the material of the blade and its longevity will matter most while using this joiner. Most manufacturers prefer carbide-tipped blade, which lasts sharper for a longer period compared to steel blades, especially, while dealing with denser materials such as hickory and walnut. Also, they hold well to the premium biscuit joiner’s speeds.

5. Blade Size

To set up the biscuit joiner, one should know the basics of the blade size. A standard 4-inch blade is the best option for most joiners to deal with a good range of biscuits (#0, #10, & #20), yet, it is not the only sizes you require. If you are looking for something that works smaller, then pick a biscuit joiner with a plunge mechanism for holding smaller blades such as 2-inches. Take a close look to ensure you have the right features in the blade and thereby biscuit joiner.

6. Cutting Angle

Tools’ versatility is an essential biscuit joiner feature that makes it loved by most woodworkers. Its adjusting cutting angles will offer the ability for cutting slots in diverse situations. Mostly, the biscuit joiner is used for edge joining of two boards, yet they are also used to bore biscuits slots for angled joinery and mitered corners, or spaces in the workpiece field for using shelves.

Also, its adjustable fences will allow you to set a specific angle and drag a precise slot. Yet ensure the biscuit joiner comes with the ability to tilt its fence to various degrees.

7. Cutting Depth

Various biscuit joiner models allow you to set the specific depth for added convenience while working, and #0, #10, #20 biscuits are quite commonly used depths for these models. While it is always better to have a wider choice for depth settings. Also, check out the models offering manual settings, why because it provides freedom to customize the depth as per your cutting requirement.

8. Handle Type

A solid grip will offer better control over the tool while operating, and for this, a reliable handle in the biscuit joiner will be the best companion. Generally, D-type handles and barrel-type handles are two different types of handles seen in joiners.

  • Barrel Style Handle Type –Since it facilitates precise boring, they offer better control over the tool. Here the user’s hand gets in slot line while cutting, which makes it easy to stay consistent and bore a precise slot. Also, various models offer top-mounted handle that maintain the tool steady while operating. Usually, the power switch of this kind of joiner is placed either on its base or side.
  • D-Shaped Style Handle Type –However, they are less precise yet more comfortable to work. Here the upright direction of the user’s hand will be quite natural and easy to push. Since the operator’s hand is higher compared to the blade, which may result in wobble and thereby results in a messy cut. Mostly, it’s trigger is installed near for easier and quicker access. It is the best option while using the joiner for extended unbroken spells. Keep in mind that the handle should be large, ergonomic, and comfortable to make you work for longer periods without getting any fatigue.

9. Fence Settings

The fence is another essential aspect of the biscuit joiner, which means you have to check its settings like how its angle and height are adjusted as per your requirement.

The common fence height adjustment system for biscuit joiners is the rack and pinion system. For adjusting the cutting height, you have to turn the knob positioned at the side or top of the fence and lock it in place with the help of a locking knob or lever.

The angle of the fence is adjusted with the help of a knob placed on the angle scale. Few angle scales come with positive stops in commonly used angles (0°, 45°, and 90°) to quickly adjust the fence angles. So, the fence angles will range from 0° – 90°, yet there are exceptions. A few models are tilted even up to 135° that allows you to cut grooves easily for miter joints. Also, ensure that the biscuit joiner’s scale is accurate without any play or movement in the fence to make precise cuts.

10. Weight and Size

A general rule is that a heavier and larger tool offers better quality parts, and a bruiser of a biscuit joiner comes with a heavy-duty motor and high-quality slides (to guide the blade when cutting to give accurate results). While a super high-end tool or heavy biscuit joiner is not essential or ideal for everyone. Various midrange options that weigh around 5 – 6 pounds (half the weight of high-end models) will work well for your requirement.

One has to determine they need a heavy biscuit joiner based on the type of projects you are handling and the frequency of your usage. With its devastating majority of DIYers, a joiner with a midrange will handle various materials such as maple and oak without any issues. While working in a cabinet shop or placing a joiner through its paces daily, then consider heavier-duty models.

11. Extra Features

Biscuit joiners come with additional features that make simple storage and easy to clean up.

A sturdy box will help to maintain the biscuit joiner secure while not using (storing). Most manufacturers pack the tools in hard plastic containers to store the joiner along with a few biscuits and other small items. Also, this case makes it a cinch to stack tools under a workbench or on a shelf.

With the bore slots with the biscuit joiner, you can make quite a mess with wood chips and sawdust. The best joiners have bags that attach to the exhaust port, which allows you to catch almost all these particles before hitting the air or ground.

Frequently Asked Questions

1. For What these biscuit joints are used?

Ans: While making eccentric furniture, yet won’t need unsightly screw and nail, which may damage the beauty of the project without the usage of this joiner. Here it comes how and where to use this biscuit joiner.
• It uses different shaped and sized wood chips called biscuits to attach two wood pieces together.
• It is used commonly in corners or joints on thick wood to cut precise biscuits holes to get into it.
• Cut a half-sized hole at every connecting wood segment’s end, and then use wood glue biscuits into the place for extra support to your working project.
• To overcome main issue which is experienced by the most people while using the biscuits is that getting stick. So, choose a specific glue suitable for your dealing wood type, and gets sticked to the biscuit properly.
• Also, remember to clean all those debris and sawdust from the biscuit pocket, and most of these biscuit joiners offer small dust collection bags that are attached to its side, yet they won’t completely remove of all these saw debris.
• We use biscuit joints in bookshelves, furniture, benches, and coffee tables. Also, use them on large projects based on the size of biscuits you are using.

2. How much space should be allotted between biscuits?

Ans: The right space between biscuits will be 6 – 12 inches away from each other. This provides the essential firm and strength hold required for your woodworking project. This space is sufficient to fortify the structure of the wood pieces, in which you need to glue.

3. What is the depth a biscuit joiner blade can cut?

Ans: Biscuit joiners can easily go as deep as 3/4-inches that allows #20 biscuits to fit comfortably.

4. What’s the difference between a biscuit joiner and a plate joiner?

Ans: Although there is no much difference between these two terms. Here, the plate and biscuit are different terms used to define the same joining tool. The term biscuit joiner is quite commonly used in the United States.

5. Shall we use biscuits for cabinet joints?

Ans: However, there are much better options for kitchen cabinetry rather than using the biscuits for cabinet joints. Usually, cabinet joints made with a circular dowel, miter, lap or tenon joint. Also, we use tongue and groove joints rarely to hold up. The usage of biscuits is not an ideal solution for long term success, why because gravity works against the operator with overhanging cabinets.

6. How deep this biscuit joiner can cut?

Ans: Though each model is different from other models yet one can rest around 0.5 – 1 inches. As you are using these for alignment and stability, which is rarely needed anything higher than that. A wood type biscuit joiner requires to be slightly cut more than biscuit size to make it effective.

However, biscuit is not used with no wood glue, and also, there should be 1/16 inches of space around its circumference of the definite biscuit size, as this space is enough for the superglue to get tie to the entire bottom ½ the biscuit.

Make sure to double-check the pre-sets to know whether the biscuit joiner cuts much space or not, as most of these models offer 4 – 6 different settings, in which there should not be much space for mistake. The manual has everything about calibrations. Subsequently using will cause vibrations from steady use may loosen its hardware parts.

7. What are materials shall we use for this biscuit joiner?

Ans: Biscuit joiners are used to work in a wide range of wood materials, a few of them including hardwoods, softwoods, MDF, plywood, laminated particleboard, and many more.

8. Can we use dowel rods in the place of a joiner?

Ans: Yes, you can use it. It is one of the best methods to join pieces of furniture. However, the problem is to cut, drill, and align them properly. Other than that, the joints created are not either effective or long-lasting.

9. Are these biscuit joints strong to use?

Ans: Usually, biscuits are not designed to use instead of long and thick bolts for the heavyweight capacity of furniture pieces. They offer more strength compared to dowel (which is of the same size). Generally, there are 4 different types of biscuits available – #20, #10, #0 and M.

The higher number will make the thicker biscuit. The biscuit joints are oval-shaped and mainly offer alignment over support. These biscuit joints are helpful while working on any project that depends on the right alignment.

However, the biscuit joiner is used to measure and angled cuts that align two wood pieces precisely in a correct way. They are strong yet used on large projects, you can better use thick bolts.

10. Can you use biscuit joint plywood?

Ans: Yes, we can use it, yet won’t work with thick/dense plywood. In case if the plywood is 1/2-inch thin, then it may weaken its build’s structural integrity. While if it is a cabinet or shoe rack, then biscuit joint is 3/4-inches or more work properly on plywood.

11. What is meant by FF biscuits?

Ans: These are petite biscuits with under #0 mark. Every biscuit joiners are not meant for cutting low as FF. So, inspecting all those details before buying any model. Mostly, we use FF biscuits in smaller wood construction with 1 ½ inch or larger range and work well from there till progress to #0 biscuits. The furniture in the home may having FF biscuits.

12. What size biscuits shall we use?

Ans: It depends on the particular project you are dealing with. In case, if you are making a seamless look on a shoe caddy, you need a #0 (1/32-inches to 5/8-inches) that is one of the small biscuit sizes. While building a bookcase, you need to use a #10 (2 1/8-inches to 3/4 -inches) or a #20 (2 3/8-inches to 1 inch), if the wood is thick.

So, ensure to maintain biscuits to the center of joints, as it won’t do much help near the edges. Scale-up based on your making, yet start with smaller projects like #0 biscuits.

Conclusion

A biscuit joiner can be a really great addition to your carpentry shop. As no two products can be the same, each biscuit joiner has its advantage as well as disadvantage. Therefore, we have created a list of the best biscuit joiners that you can buy right away. But, if you still need help with your purchase, take a look at our recommendations below:

  • Rexbeti Biscuit Joiner is a great budget option from our list. At the minimum price tag, this biscuit joiner drives a powerful 8.5 amp motor. With a maximum running speed of 10000 cycles per minute, you can get almost any domestic task done with the Rexbeti wood biscuit plate joiner kit.
  • If you want a portable biscuit joiner, then WEN Biscuit Joiner is a great option available from our picks. It has an 18-volt lithium-ion battery that can easily cut through ¾ inches thick wood. You can get up to 300 cuts or 150 joints on a single charge, which is great for a cordless machine.
  • Lastly, if you want a reliable biscuit joiner, you can take a look at the Dewalt Biscuit Joiner. This machine has a 6.5 amp motor that provides 10000 rpm, so it can be used on hardwood as well. As it has a long 3 years of warranty period, it is one of the most reliable options from our list.

Make sure to share your thoughts in the comments section. You can also post any questions down there if you have any!

Leave a Reply

Your email address will not be published. Required fields are marked *