Ravi Teja is an Embedded Firmware Engineer who has more than 6 years of experience in hardware design and firmware development. After graduation, he joined as an Associate Software Engineer in a start-up but soon realized his love for electronics and joined a post-graduation course in Embedded System Design.
After post-graduation, he joined Multibyte Technologies, a small company that specialized in developing security systems and biometric authentication systems. There he led the hardware design team for all the attendance systems and was also responsible for writing the main application software.
Couple of years later, Ravi Teja joined Reyan Digital as Technical Consultant and started creating Basic Electronic Tutorials, which are aimed at students and young engineers. During this time, he was involved in designing and developing several DIY projects using Arduino, Raspberry Pi, 8051, ARM7, ARM Cortex-M Microcontrollers with a “learn it by making it” philosophy.
Over the years, he helped several trainee engineers with industry standards in multi-layered PCBs with EMI / EMC compatible designs, writing firmware as per MISRA standards and also with basic system design.
His technical expertise includes embedded systems (complete system design), PCB Design, RTOS Porting, Board Support Package (HAL and Device Drivers), wireless and networking.
Education
Ravi Teja graduated in Electronics and Communications Engineering from JNTU, Hyderabad and has a Post Graduate degree in VLSI and Embedded System Design from JNTU, Hyderabad.
In this project, I will show you how to interface HC-05 Bluetooth with STM32F103C8T6 Blue Pill Board. By interfacing a Bluetooth Module like HC-05 or
In this tutorial, we will have a brief introduction to Logic Gates. We will see the different Logic Levels in TTL Circuits, CMOS Circuits, some
In this tutorial, I will show you how to upload a USB Bootloader on the STM32F103C8T6 Blue Pill board. Using the STM32F103C8T6 USB Bootloader, you
In this tutorial, I will show you how to use the PWM in STM32F103C8T6 MCU based STM32 Blue Pill Board. Using Pulse Width Modulation (PWM)
In this tutorial, I will show you how to configure and use a Timer in LPC1768 Arm Cortex-M3 MCU. Timers are one of the important
In this tutorial, we will learn about Sound Transducers. Two common Sound Transducers are Microphones and loud speakers. Introduction Sound is a generalized term given
In this article, we will see a special topic called Field Programmable Gate Arrays or simply FPGA. We will explore the concept of Programmable Logic
In this tutorial, we will learn about a simple but effective circuit called the Crowbar Circuit. It is essentially an overvoltage protection circuit. We will
In this tutorial, we will learn about a special type of Thyristor called the Gate Turn Off Thyristor. We will learn its construction, circuit symbol,
In this tutorial, I will show you how to use ADC in STM32F103C8T6 Blue Pill Board to measure the Input Analog Voltages. I have already
Get great content that you love. No ads or spams, we promise.
How To Guides
Product Reviews
For Students
Copyright © 2024 Electronicshub.org
