Ravi Teja is an Embedded Firmware Engineer who has more than 6 years of experience in hardware design and firmware development. After graduation, he joined as an Associate Software Engineer in a start-up but soon realized his love for electronics and joined a post-graduation course in Embedded System Design.
After post-graduation, he joined Multibyte Technologies, a small company that specialized in developing security systems and biometric authentication systems. There he led the hardware design team for all the attendance systems and was also responsible for writing the main application software.
Couple of years later, Ravi Teja joined Reyan Digital as Technical Consultant and started creating Basic Electronic Tutorials, which are aimed at students and young engineers. During this time, he was involved in designing and developing several DIY projects using Arduino, Raspberry Pi, 8051, ARM7, ARM Cortex-M Microcontrollers with a “learn it by making it” philosophy.
Over the years, he helped several trainee engineers with industry standards in multi-layered PCBs with EMI / EMC compatible designs, writing firmware as per MISRA standards and also with basic system design.
His technical expertise includes embedded systems (complete system design), PCB Design, RTOS Porting, Board Support Package (HAL and Device Drivers), wireless and networking.
Education
Ravi Teja graduated in Electronics and Communications Engineering from JNTU, Hyderabad and has a Post Graduate degree in VLSI and Embedded System Design from JNTU, Hyderabad.
In this tutorial, we will learn about two important concepts in Electrostatics i.e. Electric Flux and Gauss’s Law. This tutorial explains the concepts of Electric
In this tutorial, we will learn about one of the basic concepts that is essential for beginners in Electronics i.e. an LED Resistor Calculator. You
In this tutorial, we will learn about one of the important concepts in Embedded Programming i.e. the Bitwise Operations or Bit-level Operations. The Bitwise Operators
In the previous tutorials, we have seen the basics of Electric Charge and Coulomb’s Law. In this tutorial, we will continue exploring the concepts of
In this tutorial, I will show you How to use SPI in STM32F103C8T6 MCU based STM32 Blue Pill Board. For SPI Communication, we need one
In this tutorial, we will learn about Load Factor, what is its importance, a simple example to calculate LoadFactor and also different ways to improve
Have you ever tried to design a robot which can capture audio and video information from the surroundings and can be sent to the remote
In this tutorial, I will show you how to use the ADC in LPC1768, an Arm Cortex-M3 MCU. The ADC Peripheral is an important part
In the previous tutorial, I have shown you briefly on How to Design PCB using Eagle CAD. In this tutorial, which is a sequel to
In this tutorial, we will learn about few of the important concepts in Electrostatics called Electric Forces and Coulomb’s Law. We will see what is
Get great content that you love. No ads or spams, we promise.
How To Guides
Product Reviews
For Students
Copyright © 2024 Electronicshub.org
