Ravi Teja is an Embedded Firmware Engineer who has more than 6 years of experience in hardware design and firmware development. After graduation, he joined as an Associate Software Engineer in a start-up but soon realized his love for electronics and joined a post-graduation course in Embedded System Design.
After post-graduation, he joined Multibyte Technologies, a small company that specialized in developing security systems and biometric authentication systems. There he led the hardware design team for all the attendance systems and was also responsible for writing the main application software.
Couple of years later, Ravi Teja joined Reyan Digital as Technical Consultant and started creating Basic Electronic Tutorials, which are aimed at students and young engineers. During this time, he was involved in designing and developing several DIY projects using Arduino, Raspberry Pi, 8051, ARM7, ARM Cortex-M Microcontrollers with a “learn it by making it” philosophy.
Over the years, he helped several trainee engineers with industry standards in multi-layered PCBs with EMI / EMC compatible designs, writing firmware as per MISRA standards and also with basic system design.
His technical expertise includes embedded systems (complete system design), PCB Design, RTOS Porting, Board Support Package (HAL and Device Drivers), wireless and networking.
Education
Ravi Teja graduated in Electronics and Communications Engineering from JNTU, Hyderabad and has a Post Graduate degree in VLSI and Embedded System Design from JNTU, Hyderabad.
In this tutorial we will learn about the Bluetooth feature of ESP32 ESP32 supports both the Classic Bluetooth v4 2 as well as the Bluetooth
In this tutorial we will learn how to Program Raspberry Pi Pico using C We will see all the steps required for Programming Raspberry Pi
In this tutorial we will learn how to connect LM35 with Arduino and implement a simple Arduino LM35 Temperature Sensor To demonstrate the output I
In this project we will build a simple Access Control System using RC522 RFID Module Arduino and MG 996R Servo Motor Authenticate people using their
In this tutorial I will show you how to use a Multimeter If you are a beginner in electronics then a Multimeter is probably the
In this tutorial we will see the Pinouts of both NodeMCU board as well as the ESP 12E Module which is the base board for
In this tutorial we will learn about the pinout information of ESP32 The 30 pin ESP32 Development Board will be used to demonstrate the ESP32
In this tutorial we will learn about the BLE feature in ESP32 ESP32 has Bluetooth low Energy or BLE feature along with Classic Bluetooth ESP32
In this tutorial we will have a brief overview about the Arduino Mega Board the layout of a typical Mega board some of the important
A chainsaw is one of the most dangerous power tools When used improperly it can pose serious risks However with the right knowledge and techniques
Get great content that you love. No ads or spams, we promise.
Projects
Get great content that you love.
No ads or spams, we promise.
Your Privacy is important to us
Copyright © 2024 Electronicshub.org
