If you’re a passionate gamer with a deep love for the latest PS5 PlayStation, you might have encountered the frustrating issue of a blinking blue light on your PS5 controller. When new users face this problem, they often become concerned that their PlayStation has been damaged. But there’s no need to worry; this isn’t a significant or permanent problem for your PS5 controller. We conducted thorough research on this blue light issue and have identified various causes and solutions to help you resolve it. All you have to do is stick with us until the end of this guide, and we’ll take care of your PS5 controller.
Before we delve into the solutions, it’s important to have a basic understanding of the PS5 controller. The PS5 controller is a highly sophisticated and well-designed gaming console controller that comes equipped with status lights. These status lights provide information about the controller’s operational status. For example, a flashing blue light indicates that the controller is attempting to establish a connection with the console. On the other hand, a steady light indicates a successful connection has been established between the controller and the console, ensuring a smooth and uninterrupted gaming experience. In this guide, our primary focus will be on the flashing blue light.
Why is the PS5 Controller is Blinking Blue?
As previously mentioned, the status lights in the PS5 controller serve to provide information about the controller’s operational status. When you power on your PS5 controller, data is exchanged between the controller and the console, establishing a connection between the two devices. During this process, your controller will display a blinking blue light for a few moments. However, if this blinking continues for more than eight times, it indicates an issue: your PS5 operating system is malfunctioning, leading to a loss of connectivity and a disruption in your gaming experience.
There are several potential reasons for this problem, which are detailed below:
1. Connected Devices That are Not Compatible
Sometimes, the devices you’ve connected to your gaming console can interfere with the proper functioning of your PS5 controller. This occurs when you use devices that are not compatible with the controller, resulting in the blinking blue light. Therefore, it is essential to ensure that the devices you connect are compatible with the PS5 controller.
2. Low Battery
It’s not always the case that your PS5 controller or operating system is malfunctioning, or that there’s an issue with the PS5 gaming console. In some instances, users have found that their controllers have low battery levels. This can prevent the controller from receiving sufficient voltage or energy to perform correctly, leading to the blinking blue light.
3. Damaged USB or HDMI Cables
The blinking blue light issue on your PS5 while playing could be caused by damaged or broken HDMI or USB cables. These cables are responsible for creating interference or disruptions when connecting your PS5 console and controller. Even a loosely connected cable can be a reason for this problem. Therefore, ensure that your cables are in good condition and properly connected.
4. Interference With Other Bluetooth Devices
In today’s world, wireless technology is becoming increasingly prevalent. However, this advanced technology, including other Bluetooth devices operating in the vicinity of your gaming console, can lead to interference with your PS5 controller. You can try turning off these devices to check if it resolves the connectivity or blinking light issues.
5. Storage or Data on Board is Corrupted
There have been cases where the data stored on the PS5 controller becomes corrupted, resulting in the blinking blue light issue. You can troubleshoot this problem by verifying the storage on your PS5 controller.
6. Outdated Software/Firmware
Another possible reason for the issue is outdated software or firmware on your PS5 controller or gaming console. Sony consistently provides updates and releases to address bugs and enhance compatibility. Differences in the controller and PS5 system versions can lead to connectivity problems. It is recommended to keep both devices up to date with the latest versions.
How To Fix the PS5 Controller that is Blinking Blue?
After examining all the potential reasons for the Blinking Blue light, it’s time to address and resolve this connectivity problem. This issue can be attributed to either software incompatibility or hardware damage. Here, we present a list of possible solutions that can effectively rectify the problem, ensuring you can continue your gaming experience without interruptions.
1. Restart the PS5 Controller
One of the initial steps you should take when dealing with any electronic device is to reboot the operating system. Likewise, restarting the PS5 Console is the simplest and most expedient solution. By doing this, you clear any glitches or temporary data from the system. This provides your PS5 operating system with a fresh start, eliminating the temporary errors that disturb the connection between the controller and the PS5 console.
The Easiest Way to Achieve this is Following Below:
- As you can see the power button is available on both the PS5 Controller and gaming Console, First turn off the Controller by pressing the PS button on your controller for 10 seconds. Similarly press the power button and hold it until you hear a beeping sound two times.
- It will turn off your PS5 lights then unplug the power cable from the console and keep it unsupplied for at least 2 minutes. Now plug the power cable again and Turn on your PS5 System.
Now try checking for the stated issue, In the majority of the cases reboot solved this blue light blinking issue.
2. Check Cables
The cables used to connect your PS5 can experience wear and tear. Sometimes, bending them or using them roughly can cause damage. Therefore, examine the HDMI or USB cables. If they’re faulty, try using alternative cables. If your PS5 functions with the new cables, the issue likely stems from the damaged cables. Also, ensure that the cables are securely connected to their respective ports.
3. Clear Cache and Rebuild Database
One effective method for addressing the blue light blinking issue is to clear the old cache and rebuild the database. This process allows you to remove problematic files that may have caused issues with your operating system during connectivity. It’s important to note that you should perform these operations in safe mode.
Enabling Safe Mode
- The very first turn off your PS5 system by just Pressing the Power off button on the Console dashboard on the front side of the panel.
- Once the Light is off or the Console turned off, Now This time again press on the power button and hold it until the console system starts beeping, After hearing 2 beeps only release the power button.
- Now Use your USB Cable to connect the Console to the Controller and it will prompt you to click on the PS button on the controller, and you Enter in Safe mode and be able to see the menu on the screen.
Now comes our main solution rebuilding the database, you can achieve this by following the below Steps:
- First Turn On your Safe Mode on your PS5 by following the above easy steps.
- In the list of Safe Mode menus, Search for the “Clear Cache and Rebuild Database” and Just Click on that option.
- After clicking on it, It will ask the User, What do you want to perform first? So Click on “Rebuild Database”.This takes at least 4 or 5
- Once the above process is done, Click on “Clear System Software Cache”.This doing will clear out all your saved and corrupted cache from the system.
After Following all the above steps now time to turn On the PS5 again and check that the Blinking light has turned to the Fixed light.
4. Turn Off Nearby Bluetooth Devices
If you’ve tried all the previous solutions and they haven’t worked for you, the next step is to turn off any other Bluetooth devices that are connected in the same area as your PlayStation 5 (PS5). As we’ve discussed before, Bluetooth-connected devices within close proximity, like microphones, mice, and external speakers, can interfere with the connection between your PS5 and controller. Turning these devices off may resolve the issue of the flashing blue light. If the problem persists, proceed to our next solution.
5. Check Battery Level
While examining the possible causes, it’s important to consider the battery level of your controller, as it can significantly impact the connection. Using the controller when it has very little battery left can hinder its proper functioning. This can disrupt the data exchange required for a stable connection between your PS5 and the controller. Therefore, ensure that your controller is charged. If it’s not, connect it to a charger using a USB cable or other recommended charging devices.
6. Repair or Replace PS5 Controller
It’s not always the case that issues with the PS5 controller are solely due to software problems. There is a possibility that your controller is experiencing hardware issues. Therefore, it’s advisable to first inspect it for loose connections, damaged cables, or other minor problems that you can address on your own. If the issue remains unresolved, you should consider seeking assistance from PS5 customer services. If your controller is still under warranty and cannot be repaired, they will provide you with a replacement.
7. PS5 Controller is Overheated
When the PS5 controller is used extensively, it can experience an increase in internal and overall body temperature. This overheating issue can disrupt the controller’s normal functioning. To resolve this, it is recommended to reduce the controller’s temperature and ensure it has proper ventilation.
8. Update Software/Firmware
Sometimes, the software on your PS5 gaming console may not be in sync with the controller. Sony Playstation consistently addresses minor bugs and issues through their updates, enhancing the functionality of the PS5. This highlights the importance of keeping both your PS5 console and controller up to date with the latest software version.
Updating your Software using active internet is the easiest thing to do, You can follow the below steps to achieve so:
- Go to the Setting option by navigating from the Home dashboard.
- Select “System” and then Go to “System Software”.
- After that Click on “System Software Update & Settings” .
- Now Click on “Update System Software”
- It will prompt you that you have an active internet. Click on the “OK button”.
This way you can update your Gaming Console with the latest and improved software version. These updates take some notable time. During that time do not close your console it can crash or damage the Console operating system.
9. Factory Reset PS5 Controller
If Restarting or rebooting your PS5 Gaming console won’t work for you and you are still facing a flashing light on the controller then the best way to fix this issue is resetting the PS5 controller. Not only flashing blue light but this Fix can resolve various of the problems you may encounter while handling your PS5.
Many users are unfamiliar with this process but here is the simplest step-by-step guide to reset your controller.
- First, remove your controller from the PS5 Console and turn off the PS5 Console.
- Now just search for the small reset button. You can find it on the back side of the controller, close to the L2 button.
- It is a tiny hole, so use any small tool to push the button and hold it for at least 5 seconds.
- Your controller has reset now, and it will restart. So Connect your Console with a USB Cable to the Controller and Click on the PS button on the controller.
10. Contact Customer Support
Lastly, if all of the above solutions do not work for you, then its last option remains and is Suggested for every User that is connected with your Playstation Customer Support Team. They can assist you with a more technical and advanced guide.
PS5 Controller is Blinking Blue – FAQs
Ans: If you are experiencing problems with the connection between your PS5 controller and console, it could be because other Bluetooth devices in the area are causing interference. To resolve this issue, turn off these other devices. If the problem persists, consider resetting your PS5 system.
Ans: The intense use of the PS5 controller can vitally affect the aging of the PS5 controller. The drifting issues have been observed due to intense use and physical damage. Along with this, outdated software is also a notable point here.
Ans: We cannot determine a fixed price solely by examining the controller. When conducting a repair that isn’t covered by warranty, we follow a step-by-step process to assess and troubleshoot the controller. Based on the findings, our SCUF technician prepares a quote for a complete restoration, providing you with a new controller. The cost for this repair typically ranges from $19.95 to $85, depending on the extent of the work required.
Ans: Depends on manufacturer service, but approximately 20 to 30 days is needed for PS5 controller repair or replacement
Ans: In rare instances, this issue may occur. To resolve it, simply look for the small reset button located on the backside of the controller, near the L2 button. This button is quite tiny, so use a small tool to press it and hold it for a duration of at least 3 to 5 seconds.
Ans: In some cases, it has been noticed that a controller with a low battery can cause difficulties when trying to connect it to the gaming console. Therefore, it’s a good idea to ensure that your controller has more than a 50 per cent charge before attempting to connect it. This should resolve the problem of the flashing light. It’s also advisable to use a USB cable for charging instead of relying on wireless options.
Conclusion
We’re concluding our discussion, where we’ve explored the causes of the flashing blue light on your gaming controller and the issues it can cause with connecting to the PS5 console. Importantly, we’ll also cover the solutions to these problems. The good news is that all of these fixes can be handled by you at home, eliminating the need for a visit to a technical repair shop.
The solutions include updating your software through an active internet connection, resetting the PS5 controller, and even rebuilding the database. You can try each of these solutions step by step, and we’re optimistic that this will effectively resolve the flashing light issue.
