Ravi Teja is an Embedded Firmware Engineer who has more than 6 years of experience in hardware design and firmware development. After graduation, he joined as an Associate Software Engineer in a start-up but soon realized his love for electronics and joined a post-graduation course in Embedded System Design.
After post-graduation, he joined Multibyte Technologies, a small company that specialized in developing security systems and biometric authentication systems. There he led the hardware design team for all the attendance systems and was also responsible for writing the main application software.
Couple of years later, Ravi Teja joined Reyan Digital as Technical Consultant and started creating Basic Electronic Tutorials, which are aimed at students and young engineers. During this time, he was involved in designing and developing several DIY projects using Arduino, Raspberry Pi, 8051, ARM7, ARM Cortex-M Microcontrollers with a “learn it by making it” philosophy.
Over the years, he helped several trainee engineers with industry standards in multi-layered PCBs with EMI / EMC compatible designs, writing firmware as per MISRA standards and also with basic system design.
His technical expertise includes embedded systems (complete system design), PCB Design, RTOS Porting, Board Support Package (HAL and Device Drivers), wireless and networking.
Education
Ravi Teja graduated in Electronics and Communications Engineering from JNTU, Hyderabad and has a Post Graduate degree in VLSI and Embedded System Design from JNTU, Hyderabad.
In the previous tutorials we have seen about Low Pass and High Pass Filters. In this tutorial, we will learn about another category of filters
In this tutorial, we will learn about Active Filters Design in brief. In the previous tutorial, I have discussed all the types of Active Filters
Have you ever made your own robot? Here is a very simple and easy robot. In this project, I will explain how to design and
In this project, I will show you how to Interfacing ISD1820 Voice Recorder Module with Arduino. Although the ISD1820 Voice Recorder Module board has button
We have already seen in the earlier posts about how to jam the mobile signals using simple mobile jammer circuit. Now, in this project, we
In this project, I will show you how to make a simple Unbiased Electronic Dice with LEDs. This project consists of 6 LEDs, a 555
In this tutorial, we will learn about Touch Sensors. Today, almost all user interface is based on touch. The range of applications is count-less and
In this project, I will show you how to design a simple LED Lamp Dimmer Circuit using very simple components. In this circuit, initially, the
Introduction In this project, I will show you how to interface a Water Flow Sensor with Arduino. Using this Arduino Water Flow Sensor tutorial as
In this project, I will show you how a Bipolar LED Driver Circuit can be implemented using 8051 Microcontroller. A Bipolar LED is different from
Get great content that you love. No ads or spams, we promise.
How To Guides
Product Reviews
For Students
Copyright © 2024 Electronicshub.org
