Ravi Teja is an Embedded Firmware Engineer who has more than 6 years of experience in hardware design and firmware development. After graduation, he joined as an Associate Software Engineer in a start-up but soon realized his love for electronics and joined a post-graduation course in Embedded System Design.
After post-graduation, he joined Multibyte Technologies, a small company that specialized in developing security systems and biometric authentication systems. There he led the hardware design team for all the attendance systems and was also responsible for writing the main application software.
Couple of years later, Ravi Teja joined Reyan Digital as Technical Consultant and started creating Basic Electronic Tutorials, which are aimed at students and young engineers. During this time, he was involved in designing and developing several DIY projects using Arduino, Raspberry Pi, 8051, ARM7, ARM Cortex-M Microcontrollers with a “learn it by making it” philosophy.
Over the years, he helped several trainee engineers with industry standards in multi-layered PCBs with EMI / EMC compatible designs, writing firmware as per MISRA standards and also with basic system design.
His technical expertise includes embedded systems (complete system design), PCB Design, RTOS Porting, Board Support Package (HAL and Device Drivers), wireless and networking.
Education
Ravi Teja graduated in Electronics and Communications Engineering from JNTU, Hyderabad and has a Post Graduate degree in VLSI and Embedded System Design from JNTU, Hyderabad.
In this tutorial, we will learn about Field Effect Transistors or FET, its working, regions of operation and see the working of a FET as
In this project, we will see how to Connect I2C LCD with Arduino. We have already seen how to interface a regular 16×2 LCD with
GSM GPRS Modules are one of the commonly used communication modules in embedded systems. A GSM GPRS Module is used to enable communication between a
In this tutorial, we will see a brief Introduction to Transformers. We will learn what is an electric transformer, the construction of a transformer, its
The phase rotation or phase sequence measurement is needed when connecting three phase supplies to electrical drives, electrical motors and other electrical systems. Phase sequence
Automatic Room Lighting System is a microcontroller based project that automatically turn on or off the lights in a room. Electricity, being one of the
In this project, I will show you how to make a simple Music Player using Arduino and a Micro SD Card Reader / Module. Using
The most commonly used and widespread method of detecting the magnetic field is the Hall-effect method among the various sensing technologies. Based on the Hall-effect,
An Inductor is usually a coil of wire that sets up an alternating magnetic field around it when an alternating current flows through it .Inductance
In this project, we will have brief discussion on how to interface 16×2 LCD module to AT89C51, which is an 8051 family microcontroller. We use
Get great content that you love. No ads or spams, we promise.
How To Guides
Product Reviews
For Students
Copyright © 2024 Electronicshub.org
