Come the cold months or the hot, dry season, your air-conditioner or the heater becomes your sole savior. However, the primary concern while using the machines is the power consumption. Hence, it is essential that when you are using a heater or an air-conditioner, ensure that it is low on energy consumption.
It is for these reasons HSPF rating is necessary. If you purchase a product with a low HSPF rating, soon you will have to bear the other overhead expenses, including high electricity bills.
What is the HSPF rating?
HSPF means how much power your machine will consume during excessive heat. It stands for Heating Seasonal Performance Factor. So, if the ratings are high, your machine is efficient. Therefore, the power consumption is also low. However, if the ratings are low, then there are some issues for which you need to bear additional expenses. The ratings are based on the amount of electricity it uses when the surrounding heat is high.
Therefore, if you plan to invest in a heater, it is advisable always to check its HSPF rating. Usually, an HSPF rating of twelve and above is good to go. It is because it is the power consumption that matters. If you pay huge electricity bills every month, investing in a heater becomes baseless.
How is the HSPF Rating Calculated?
If investing in a heater, you must know its HSPF rating. It is because the HSPF rating determines the efficiency of the machine. However, if your electricity consumption is higher, you should get acquainted with the calculations for determining your machine’s HSPF rating. The calculation of the HSPF of your machine is as follows:
- The machine’s electricity power during a particular day is usually in kilowatt-hours.
- The heating effect you are getting at the same time is expressed in BTU.
Therefore, when you divide the heating effect of the machine by the amount of power consumed, you will get the HSPF of the machine. If you find the HSPF rating below ten, it is time to change your machine, and it is because you will be landing yourself in some extra overhead expenses. Hence, it is always advisable that while purchasing a heating machine, you must always check its HSPF rating.
What is a Good HSPF Rating for Heat Pumps?
Though heat pumps consume a lot of power, there are ways by which you can minimize your electricity bills. Therefore, it is a good investment if the HSPF rating is between 8.0 and 10.0. Moreover, the heater will get an ‘energy star,’ meaning it will consume less power. Thus, you can save on your extra expenses on electricity bills.
Moreover, if you can get a heat pump with more than a 10.0 rating, it will work wonders. However, as the ratings are higher, the cost of the machines will also be higher. Hence, before investing in a machine, ensure a thorough knowledge of the machine and the HSPF ratings.
Which Systems Have the Highest HSPF Ratings?
There are various systems in the market that you can choose according to your needs and requirements. However, before considering a purchase, you must thoroughly research the best systems you are famous for and energy savers. It is because if you invest in a machine to keep you warm and cold, you must also ensure that it does not burden you.
The power bills matter the most; if the electricity bills are high, you must switch to something else. Following are some of the best systems with the highest HSPF ratings.
1. Goodman Seer
If you are wise enough, making a one-time investment in a machine is perfect. Hence, if you are considering installing a machine that will keep you cool in the hot, dry season, Goodman Seer is perfect for your house.
It has a high SEER rating that will keep you cool and save a lot on high electricity bills. This system is ideal for anyone looking for the best. It is because of its high SEER ratings the efficiency level is exceptionally high, and at the same time, it saves you from overspending your budget.
2. Senville LETO Series
The Senville LETO series mini split air conditioner is just the machine you require for your house. It is equipped with some of the latest technologies like Wi-Fi and other similar components that will surely give value for your money.
However, though the SEER rating is a bit low, it is popular among many. It is one of the most reliable air conditioners to excite you during the hot and humid summer months. Moreover, you will get the controls at your fingertip since it is Wi-Fi enabled.
3. Cooper and Hunter Sophia Series
The Cooper and Hunter Sophia series is one of a kind. It is a must for every home where people suffer from unbearable heat. Moreover, the machine is cost-effective as the SEER rating is high. The machine is fast growing in popularity among the others in the market.
One of the advantages of opting for the Cooper and Hunter Sophia Series is that you will get the machine in any size of your choice. Hence, you can install the machine in any room with varying areas. Moreover, once you install the machine, there is no looking back. You will want to stay in the room in the hot and humid weather.
4. Pioneer Diamante Ultra Series
When investing in the Pioneer Diamante Ultra Series, you do not have to think of anything else. It is a hassle-free machine as the installation is easy, and at the same time, the machine is durable. One of the specialties of the machine is that it is dual. It means it works in both heating and cooling modes. Moreover, since the HSPF and SEER rating of the machine is high, the efficiency level is at its best.
You will save a lot on your monthly electricity bills throughout the year. So, the Pioneer Diamante Ultra Series is the ideal machine for your house in a place with extreme temperatures. You can get the machine in a wide range of sizes according to the needs and requirements of your house.
5. MrCool DIY 4th Gen Series
This is another machine with both cooling and heating options. The machine’s primary feature is its high SEER rating, perfect for the hot summer. On the other hand, the HSPF rating of the machine is also worth mentioning, as it can warm up your room with high efficiency.
Hence, if you are worried about your high power bills and at the same time want comfort during extremes of temperature, you must opt for MrCool DIY 4th Gen Series. It will make your life happier and cozier.
What are the Factors that Influence HSPF Rating?
While selecting a heat pump, though it is necessary to check its HSPF rating, there are also several factors that you must also keep in consideration. So, if you reside in a place with moderate temperature, there is no need to invest in a high HSPF-rating heat pump.
However, if there are temperature extremes, you must invest in a heat pump with a high HSPF rating. Following are some of the crucial factors that influence the HSPF rating.
1. Climate
If you reside in a place with excessive cold or heat, you must get a machine with a high HSPF rating. The cost will be higher than usual, but your overall monthly expenditure on power bills will be down. It is because the higher the HSPF rating, the higher the efficiency.
Therefore, a particular place’s climate influences a machine’s HSPF ratings. Hence, if you reside in a colder climate, you must invest in a machine with a high HSPF. On the contrary, a low-power HSPF rating machine will suffice if the climate is moderate.
2. Size of the Machine
The size of a machine plays a crucial factor that influences HSPF rating, and it depends on the area of your room. If you consider installing the machine in a moderately small room, a machine with low HSPF will be good enough. It is perfect for your room if the ratings are between 8.0 and 10.0. However, if your room is considerably more significant, a low HSPF rating heat pump can soar your expenses on electricity bills.
Therefore, it is best to choose the machine’s size according to the size of your room. It will give you maximum efficiency and, at the same time, lower your electricity bills. However, you must ensure that there are better moves than too big a machine for a small room.
What is the Difference Between HSPF and SEER?
If you install a proper heat pump with high HSPF ratings, it will comfort you during extremes of temperature and, at the same time, check your high electricity bills. Moreover, heat pumps have become popular in the recent era primarily because it conserves the environment. It is because if you use a fire furnace during the cold winter months, you will consume a lot of fuel that is not eco-friendly.
Hence, our modern-day machines have the power to heat and cool your house during extremes of temperature. For these reasons, you must have the correct HSPF and SEER ratings. One of the significant differences between the HSPF and SEER ratings of a machine is that the former is used for cold winter months while the latter is for hot and humid climates. So, when the weather is unbearable, you turn on your cooling device.
The machine then pumps out the warm air from the house, thus making it extraordinary. On the contrary, during winter, when the heating mode is at play, the warm air from outside is pumped into the house, thus making you cozy and comfortable. However, you must understand how much energy is consumed in both cases. Therefore, HSPF is used to measure the heating capacity of the machine, while SEER is used for the cooling capacity.
Hence, it is essential that while investing in a machine, ensure to check the HSPF rating and the SEER rating so that they are on the list of an energy saver. You will find the ratings on the label of the machine. Therefore, it is advisable to know how much rating is perfect for your house so your monthly power bills are low. Moreover, several other factors determine the machine’s best HSPF or SEER rating.
If the climatic conditions are extreme, you should go for a higher rating to save your electricity bills. So, if the winters are longer than the summers, you need to check the HSPF ratings, and if the summers are long and dry, you have to consider the SEER ratings. Therefore, you must make a wise choice by selecting a suitable machine for your house so that you are comfortable and cozy.
Various machines are available in the market for both cooling and heating modes. Therefore, if you invest in a machine with dual mode, ensure that the HSPF and the SEER ratings are high.
Conclusion
So, if you still have a fireplace in your house, it is time to make some drastic changes. It is because of the advent of heat pumps. It will make your life easier and happier. Moreover, heat pumps can give you comfort in the cold winter months as well as the hot, dry summer months. The efficiency level is also higher than the traditional furnaces.
So, you will also save a lot of extra expenses on your monthly electricity bills. Hence, it is time that you start thinking of making a one-time investment in a heat pump and enjoy the benefits for years to follow.
