Search
Close this search box.

Home

The 7 Best Siding Nailer 2024: Top Picks, Reviews & Buying Guide

Here you can find some top-notch siding nailers for installing siding to secure the framework of your house.

Siding nailer is a handy tool that completes the job with performed in less amount of time compared to ordinary hammer. They shoot shank nails to hold the material for a longer time. This function-specific tool is expensive, powerful, lightweight, and easy to use.

With its soft tip, the siding nailer doesn’t damage the siding material and offers enough power required for siding on both hard siding materials (like oak) and soft siding material (like cedar).

There are a multitude of nailers with different types and sizes to work on different activities like siding, decking, fencing, surrounding, or sleighing..

To pick the correct siding nailer suitable for your needs, we recommend considering the below key factors.

  • Nail Size: A nailer operating with different sizes of fasteners (or sizes) will let you work on different projects. The general nail size used by this siding nailer is 1 ¼ – 2 ½ inches. Ensure to use nails that are twice the depth of material you are working on.
  • Operating Pressure: Almost all of the siding nailer options out there are pneumatic ones that are powered with an air compressor. Due to this, you have to check the operating pressure of the model before buying and using them. The pressure is measured in terms of Pounds per Square Inch (PSI), and the general pressure range will be 70 – 120 PSI.

We have done a lot of research on several products and shortlisted some Best Siding Nailers to narrow down the searching and shopping time. Also, we provided a detailed Buying Guide to help you in selecting the right option as per your siding requirements.

You can also check our other nail guns reviews like framing nailers, brad nailers, roofing nailers, flooring nailers, and finish nailers.

Top Siding Nailers in 2024

Siding NailersNails SizeOperational PressureWarrantyBuy Now
BOSTITCH Coil Siding Nailer1 ¼ inch to 2 ½ inch70 PSI to 120 PSI7 yearsCheck On Amazon
Freeman Pneumatic Siding Nailer1 ¼ inch to 2 ½ inch70 PSI to 110 PSI7 yearsCheck On Amazon
HBT 15 Degree Coil Siding Nailer1 ¼ inch to 2 ½ inch70 PSI to 120 PSINACheck On Amazon
Metabo HPT Siding Nailer1 ¼ inch to 2 ½ inch70 PSI to 120 PSI5 yearsCheck On Amazon
MAX CN565S3 Siding Coil Nailer1 ¼ inch to 2 ½ inch70 PSI to 120 PSI5 yearsCheck On Amazon
Hitachi Coil Siding Nailer1 ¼ inch to 2 ½ inch70 PSI to 120 PSI5 yearsCheck On Amazon
DEWALT DW66C-1 Fencing Nailer1 ¼ inch to 2 ½ inch70 PSI to 120 PSI3 yearsCheck On Amazon

Best Siding Nailer Reviews

1. BOSTITCH Coil Siding Nailer

BOSTITCH Coil Siding Nailer

You can find a wide range of durable and heavy-duty power tools offerings from Bostitch out there. They even make a great siding nailer for construction purposes that we have presented here in this article.

The Bostitch N66C siding nailer is present in the 1st position in this article as it is a great reliable, and powerful option when it comes to siding nailers. If you are familiar with Bostitch power tools, then you must know that they come with a 7-year long warranty. And since this is also true with this sturdy and well-built siding nailer from Bostitch, you can rely on it for a long time. Despite the sturdy construction, it is quite lightweight and portable. It is possible because of aluminum construction that offers a balance between strength and weight.

As for its performance, you get very similar numbers to the various options out there. This includes the support for 1 ¼ inch to 2 ½ inch nails in terms of the length. And these nails can be used for siding with the help of an air compressor. You need to set an air pressure of 70 PSI to 120 PSI in order to use it properly. A great thing about this siding nailer is that its magazine can hold up to 300 nails at once, which is quite decent for most users out there.

Best Features:

  • 1 ½ inch to 2 ½ inch nail length support
  • 70 PSI to 120 PSI operational air pressure
  • 7-year warranty
  • 300 nail capacity magazine
  • Lightweight aluminum design
  • Strong and sturdy build quality
  • Tool-free adjustable exhaust
  • Adjustable depth guide

Pros:

  • Highly reliable
  • Lightweight and portable design
  • Decent performance

Cons:

  • Slightly expensive
  • Lacks accessories

Buy Now From Amazon

2. Freeman Pneumatic Siding Nailer

Freeman nailer

Freeman is another popular brand of power tools but offers much affordable products when compared with other reputable brands out there. You can even find a great siding nailer option from Freeman for construction use.

Freeman’s PCN65 pneumatic siding nailer is present in the 2nd position in this article as it is a highly reliable one. But unlike other options out there that come with a 7-year warranty, this one is much cheaper and offers value for money to the user. The build quality of this siding nailer is also quite decent for the given price. You can use 1 ¼ inch to 2 ½ inch along with this siding nailer while working in house construction. These nails can even be installed at an angle of 15 degrees if needed with the help of its adjustable and angled head.

As per its name, this siding nailer is quite ergonomic and lightweight. This is possible due to the grip handle that allows you to use it for a long time. Although, you need to maintain an air pressure of 70 PSI to 120 PSI in your air compressor while using this siding nailer. Its nail magazine can hold up to 400 nails at once, which is quite high even for heavy-duty or industrial applications. You can use these nails for various applications like cement siding, sheathing, fencing, and much more.

Best Features:

  • 1 ½ inch to 2 ½ inch nail length support
  • 70 PSI to 120 PSI operational air pressure
  • 7-year warranty
  • 400 nail capacity magazine
  • Ergonomic and grippy handle for ease of use
  • Usable for various applications
  • Value for money

Pros:

  • Great value for money
  • High nail capacity
  • Highly reliable and durable

Cons:

  • Average build quality
  • Slightly large design

Buy Now From Amazon

3. Metabo HPT Coil Siding Nailer

Metabo HPT Coil Siding Nailer

Metabo HPT stands for Metabo Hitachi Power Tools that mainly make heavy-duty power tools and equipment. Hence, its consumer-grade siding nailer is quite powerful and reliable at the same time.

This Metabo HPT NV65AH2 siding nailer is present in the 3rd position in this article as it can be another great option if you are looking for highly powerful pneumatic siding nailers. You can use this siding nailer while siding with nails of 1 ½ inch to 2 ½ inch length. These nails can either be wire or plastic sheet collated nails as per your needs and requirements. Another great thing about this siding nailer is that it allows you to change the depth quite easily using its tool-free adjustment mechanism. It can be quite handy while using 16-degree wire collated coil nails for siding.

Since Hitachi is a highly popular and reputable power tools brand, it offers a 5-year long warranty with it. You can even expect excellent build quality from this pneumatic siding nailer. And since it is a pneumatic siding nailer, you need to connect it to an air compressor for using it. As for the air pressure, it can operate from 70 PSI to 120 PSI quite easily. This siding nailer offers a magazine on the bottom for fast and easy reloads once you run out of siding nails.

Best Features:

  • 1 ½ inch to 2 ½ inch nail length support
  • 70 PSI to 120 PSI operational air pressure
  • 5-year warranty
  • Magazine on the bottom
  • Tool-free depth adjustment
  • Plastic shield for extra safety

Pros:

  • High performance numbers
  • Easy adjustment options
  • Ergonomic design

Cons:

  • A bit expensive
  • Low magazine capacity

Buy Now From Amazon

4. HBT 15 Degree Coil Siding Nailer

HBT 15 Degree Coil Siding Nailer From long-lasting power tools to high-efficient protective gear the brand HBT has brought together everything you need. The siding nailer, HBCN65P, you can see here is the most trusted and well-reviewed tool from the brand with quite pleasing features.

This nailer is typically used to drive 1-¼ inches to 2-½ inches plastic or wire collated coil siding nails. It is given a Magnesium housing which adds up to the lightweight performance [and extensive durability.

Whenever the machine is stuck or needed maintenance you can open the magazine for Jam-release and quick reset to the nose guide.

With just a flip of a switch, you can set the nailer to sequential fire or contact fire depending on your requirement and the material you are working on.

You can also adjust the nails to the desired depth without having to use any extra tools. Moreover, it features a 360-degree adjustable exhaust to direct away the barrel from the user and a 360-degree swivel air plug that reduces the hose twisting resulting in better work area control.

Best Features:

  • 1-¼ inches to 2-½ inches nail support
  • 360° adjustable exhaust
  • 360° swivel air plug
  • 4.99 pounds weight
  • Magnesium housing

Pros:

  • High durability
  • Easy Jam release and maintenance
  • Switchable modes
  • Easily adjustable nail depth

Cons:

  • Prone to frequent jamming

Buy Now From Amazon

5. MAX CN565S3 Siding Coil Nailer

MAX CN565S3 Siding Coil Nailer

Max is a lesser-known brand of power tools when compared with other options available out there. Even then, its siding nailer offers decent performance along with a sturdy design that makes it an excellent option for a lot of users out there.

The Max CN565S3 is one of the more premium or expensive siding nailers out there when compared with other options. Although its build quality and performance might be worth the price for a lot of users. Just like the rest of the options mentioned in this article, you can use 1 ½ inch to 2 ½ inch long nails for siding while using this nailer. It allows you to easily and precisely drive these nails for siding with the help of any air compressor. You have to simply keep your air compressor from 70 PSI to 120 PSI to ensure that you do not face any performance issues while using this siding coil nailer.

As this Max power tools brand is one of the expensive ones, you get a 5-year long warranty with it, which is to be expected for the given price. When combined with its maintenance-free end cap filter, you should not face any issues with it down the road. Another handy feature offered by this siding nailer is its 360-degree twist adjustable exhaust deflector. It allows you to blow air away from you without interfering with your work.

Best Features:

  • 1 ½ inch to 2 ½ inch nail length support
  • 70 PSI to 120 PSI operational air pressure
  • 5-year warranty
  • Easy twist adjustable deflector
  • 360-degree exhaust for deflecting air
  • Anti double fire mechanism
  • Maintenance-free end cap filter

Pros:

  • Decent reliability
  • High performance numbers
  • Easy to use

Cons:

  • Expensive
  • Average build quality

Buy Now From Amazon

6. Hitachi Coil Siding Nailer

Hitachi Coil Siding Nailer

As mentioned earlier, Hitachi or Metabo HPT makes a wide range of power tools, including various pneumatic siding nailers for construction needs. Hence, we are here with yet another siding nailer offering from Hitachi.

This Hitachi NV65AH2 siding nailer is quite similar to the last Metabo HPT option mentioned in this article. You get the same 1 ½ inch to 2 ½ inch long nail support while using this siding nailer for construction purposes. It is able to drive these nails without much effort as it is a pneumatic tool. The user needs to connect an air compressor that has an operational air pressure from 70 PSI to 120 PSI at all times. Once that is done, you drive 2 ½ inch nails at a fast speed of up to 3 nails per second that can save a lot of time for the user.

Just like the previous Metabo HPT siding nailer, this one also comes with a 5-year long warranty. And this is alongside the great build quality offered by it that is always great to have. Despite being highly durable and strong, it weighs just 4.8 pounds that is quite decent for the offered performance. You also get a tool-less depth adjustment system to ensure high precision while working. Its adjustable air deflector can be useful for keeping the pressurized air away from you.

Best Features:

  • 1 ½ inch to 2 ½ inch nail length support
  • 70 PSI to 120 PSI operational air pressure
  • 5-year warranty
  • Drive 3 nails per second of 2 ½ inch length
  • Weighs 4.8 pounds
  • Drives wire and plastic sheet collated nails
  • Adjustable air deflector for ease of use

Pros:

  • Lightweight and portable design
  • Highly reliable
  • Decent performance

Cons:

  • Discontinued model
  • expensive

Buy Now From Amazon

7. DEWALT DW66C-1 Fencing Nailer

DEWALT fencing nailer

If you are familiar with power tools, then you must have heard about Dewalt. Apart from making a wide range of electric tools, you can even find a great pneumatic siding nailer option from Dewalt.

The Dewalt DW66C siding nailer offers a 15-degree angle adjustment just per its name. This can be quite handy for various kinds of applications. As for its nail length support, it can fit 1 ½ inch to 2 ½ inch long siding nails without any issues. And these nails can either be wire or plastic sheet collated ones as per your requirement. You can fit a total of 300 such nails in the nail magazine offered by this siding nailer. This means that you do not have to replace nails again and again while working at 70 PSI to 120 PSI operational air pressure.

Just like Makita, Dewalt also offers a 3-year long warranty with its tool. However, since it uses an aluminum body, you get decent strength even though it weighs just 4.9 pounds. Apart from aluminum, this siding nailer also uses rubber in different places to ensure that you do not scratch or damage the work surface. Its tool-less adjustment system can be handy for different kinds of work requirements and needs.

Best Features:

  • 1 ½ inch to 2 ½ inch nail length support
  • 70 PSI to 120 PSI operational air pressure
  • 3-year warranty
  • 300 nail capacity magazine
  • Weighs 4.9 pounds
  • Rubber parts for preventing work surface damage
  • Lightweight yet sturdy build quality
  • Works with both wire as well as plastic sheet collated nails

Pros:

  • Lightweight design
  • Works with various kinds of nails
  • Rubber parts in multiple places

Cons:

  • A bit large
  • Average performance

Buy Now From Amazon

How to Choose the Best Siding Nailer

Be it for either low-volume DIY use or heavy-duty professional use, you have to choose the best quality siding nailer to accomplish your task. Using the wrong tool will hinder you from grabbing the desired result and affect your experience as well.

So, we are providing a buying guide with all the details related to siding nailers to help you in selecting the best option.

Let’s get into the details of what factors to consider while shopping for the siding nail gun.

1. Types

Based on the firing mode and operating pressure, the siding nailers are classified into two main types – coil and pneumatic. Knowing about them will help you in selecting the correct option.

  • Coil Siding Nailer: The metal piston is the main component in this coil siding nailer and is well-fitted with a front rod to shoot out nails. Here the solenoid (or several solenoids) is used to drive the piston, in such a way that the piston is seized at the solenoid’s center. Then it releases solenoid when a nailer has to deliver power. The more the solenoids are released, the more power it generates. With the ability to release solenoids on demand, you will get control over the amount of power generated by the nailer. Hence, you can easily use this nail gun for siding both regular and harder objects, yet most commonly used for harder objects.
  • Pneumatic Siding Nailer: Compressed air is a must to operate this type of siding nailer. So, attach the nailer to an air compressor for the required pressure supply to drive nails and operate them. Also, this siding nailer is a more powerful and efficient option that is used for both hard and soft objects. These are cheaper compared to the cordless model, as they won’t have to replace any battery, and thereby a lot of money is saved in the extended run.

2. Nail Sizes

A versatile tool is highly essential to perform several tasks. In other words, the nailer using more/different sizes of fasteners will allow you to work on a variety of projects. It is not only just applicable to longer nails. Generally, the nail size has to be twice the depth of the material you are working with. For instance, a nailer shooting 1-inch nails is required while working on 1/2-inch material. Hence select a model accommodating the widest range of nail sizes.

The common nail sizes used by standard siding nailers will range from 1 ¼ – 2 ½ inches to do siding work quickly, easily, and efficiently. So, we suggest you check the supported nail size of the siding nailer before making your purchase. This is particularly essential for coil nailers because they won’t have much room to wriggle around sizes. Furthermore, nailers with a standard magazine will support 2 ¼-inch or even longer nails.

3. Operating Pressure

Pneumatic siding nailer powered by the air compressor to operate this power tool. Here the operating pressure produced by the compressor will determine the force used to shoot the nail/fastener. This operating pressure is measured in terms of pounds per square inch (PSI). Prefer a siding nailer having a lightweight and transportable compressor with an operating pressure of 70 to 120 PSI.

Ensure your nailer and hose connecting the air compressor (air inlet) will suit perfectly and can withstand high pressure. The maximum operating pressure of 320PSI for some models. The higher the air pressure used, the more forcefully the siding nailer will work.

4. Nail Capacity

A nail gun with a greater capacity will let you work for a longer time without often reloading them. Thus, a nailer with a larger nail capacity will enhance productivity with its continuous usage. Choose the nailer that comes with a capacity of 200 – 400 nails and accepts nails of 1 ½ – 2 ½ inches (either wire or plastic nails). These nails can easily store up and shoot hundreds before reloading the nailer once more.

5. Depth Adjustment

In general, the resistance level will vary from one type of material to another. For example, concrete siding offers a bit higher resistance compared to wood. This means a nailer with a different firing depth adjustment is required to do your task perfectly. So, choose a model featuring depth adjustment to set/modify them as per your nail firing requirement based on the material (vinyl, wood, or hard concrete surfaces).

Furthermore, you can use nails of various lengths and set the firing pressure to make it work on a wide selection of siding materials or different surfaces. However, fixed depth won’t make you use the same nailer to deal with numerous materials. While this depth adjustment prevents both over-shooting (where the hole needs patching) and under-shooting (use a hammer to drive exactly).

Some modern models offer tool-less depth adjustment, which is easily controlled with a dial. They let you quickly customize the drive depth as per the requirement of nail length and material used in your project. If you precisely adjust this depth, then you can do your work more conveniently.

6. Jam Removal/Anti-Jam Mechanism

Jamming is a quite common problem experienced by most siding nailer users. There are several reasons behind this jamming (mainly occurs close to its nose) like a cheaper model, improper mechanism, nail coil faults, or small pieces of debris in the nailer. Whatever the reason behind jamming, you have to choose a model that let you quickly clean the inside jam with ease.

Some models provide needles to clean the jam. Usually, this jam happens close to the nose of a nailer, so choose a model that has access to this part easily and can remove it quickly without any need to use a tool kit.

7. Firing Modes

Usually, a siding nailer can shoot nails in either of the two modes – sequential or contact (Bump). Contact mode provides added safety and an excellent finish. They fire only when you press or squeeze the nailer’s head. Thus, it is the best firing mode for experts or professionals. While the sequential mode is easy and convenient to use, which means the best option for beginners. Yet its finish is not at all bad. Also, they fire continuously like a rapid firing to make your work done faster.

So, choose a model with multiple firing modes to speed up the project and to use for different situations, even standard is the perfect option. Also, this selectable trigger will let you switch easily from one firing mode to another. A model featuring a lock mode setting as an extra safety feature to get rid of any accidental firing.

8. Magazine

The ease of using a nailer will be determined by the type of magazine it has. You can load the magazine of the nailer in either of these two ways – side-load or tilt bottom magazine. However, choosing a nailer with a clear/transparent magazine compartment will determine or let you visualize when you run low or what nail size you load in the nailer. The maximum magazine capacity of the nailer will range from 200 – 400 fasteners. If the nails are small, then it can even store and drive hundreds of nails before you reload the magazine.

9. Weight & Size

The size and weight of a siding nailer will determine the balance, which in turn decides its performance. So, a lightweight, smaller, and well-balanced nailer is an ideal type. If you feel either the top or bottom of the siding nailer is heavier, then it makes you feel uncomfortable and instantly stress out the hand or wrist, especially when used for an extended time.

Almost all siding nailers come with a standard weight range of 4 ½ to 6 ½ pounds. Keep in mind that we use a ladder for siding on higher or awkward positions, then an overly large unit or heavy tool won’t provide proper balance, and it is a bit hard to control. So, use a lightweight and easy to maneuver nailer, which can be easy to store and transport.

10. Ergonomics

Irrespective of the size, design, and weight, holding a siding nailer for a prolonged time will result in hand fatigue. So, we suggest you choose a model having an easy to hold and ergonomic handles (not too thick or thin) to limit the fatigue. Also, it should provide an effective handgrip and fits into your palm perfectly to prevent slipping and fatigue while dealing with long projects.

11. Adjustable Exhaust

A regular exhaust vent is another feature (especially for pneumatic siding nailers) used to get rid of dangerous bursts of air blowing on the face. They shoot the nails with the help of pressurized air and this air has to get out of the nailer for its proper working. So, prefer a nailer with a multi-directional exhaust (360° adjustment) to expel the exhaust away from you and others associated with your project.

12. Durability & Build Quality

Everyone wishes that any product/tool they purchase should last for a longer time without replacing or repairing its parts. To make it happen, you have to check the durability of the product before buying a siding nailer. The durability depends on its build quality, which in turn, depends on the type of material used for its housing.

Aluminum and magnesium are two main types of materials used for the construction of these siding nailers. These are strong, and durable materials that can easily resist corrosion and rust. A few models feature an in-built filter to protect the interior parts from exterior debris and dust. Thereby it improves the tool’s durability.

Furthermore, both of these housing materials are firm and lighter in your hands letting you handle the tool comfortably for a longer time with no more loose ends.

13. Safety Measures

It is another must to consider key factor, especially when choosing the power tools to ensure that they won’t be any risk exposure to the operator or nearby people working around it. So, it is essential to check the safety features like safety lock, multiple firing modes, adjustable exhaust, no-mar tip, or protective guard before you purchase or use the nail gun.

Here are some safety measures you have to know for the safe and effective usage of this siding nailer.

  • Pneumatic models can be dangerous due to the presence of compressed air. So, pick a model having adjustable exhaust and suitable operating pressure.
  • Eject collated nail wire to the side while operating the gun.
  • A Protective (plastic) guard/shield will stop it from moving where you don’t want it to.
  • For protecting your project and nailer, you have to follow two main precautions – rubber tip on the gun’s point (averts dents while firing) and rubber bumpers on the gun’s body (protect nailer & avoid damage).
  • A carrying case will help you to store and transport the nailer easily and effectively.
  • No-mar rubber nose (foot) will prevent the nailer from marking the surface of the siding. Especially while using wire collated nails, the gun ejects small bits of wire debris. Thus, it captures and directs.
  • A helpful belt hook will be an added safety measure.
  • Lock setting will help to prevent accidental firing and thereby enhance security.

 14. Performance & Speed

Several factors like the operator’s expertise, the construction and design of the model, and its features will have an impact on the performance of a product. You should pick a siding nail gun that drives the nail precisely without being too deep or too shallow, yet it should do your activity in less time with a perfect finish, precision, control, consistency, and efficiency. Ensure that your nailer has a dual firing mechanism (bump fire or single fire mode) to use in any situation (evenly on any surface) by using a selectable trigger.

A well-designed nailer with moderate speed is required to perform the proper siding process. Select the speed based on the type of material in which you are siding and project requirements. Ensure that you should not damage the material with too much nailing force, yet need a decent amount of force for strong affixing. Most models are adjusted to provide a perfect balance between power and speed for proper siding.

15. Collation

Collation (organizing or assembling) is defined as the way to align the nails properly to make them fit in the magazine. Wire-collated and plastic-collated nails are common nails used by these siding nailers. This will affect certain things like the speed of nailing and the frequency of jamming.

Plastic collated nails are cheaper and less reliable that can break easily (outside and inside the magazine) and thereby causes lockups and jams. These are held with plastic material.

Wire (or weld-wire) collated nails are made by welding thin metal strips into the nails. A reliable and stronger option that efficiently feeds the nailer to prevent jams. These nails are placed parallel to each other like plastic collated nails.

You can choose either collation as per your preferences (or) look for a nailer that allows both collations (BOSTITCH N66C – 1) to make it more versatile and can be used in various projects.

16. Versatility

If you are a professional worker or have to deal with different tasks, then it is worthwhile to have a versatile siding nailer. With its ability to install different siding materials (like aluminum, wood, or vinyl), it becomes the best option to work on a variety of projects. Since it accepts different nail collations, the siding nailer is a handy option to work for other projects such as fencing.

Power output will also determine the tool’s versatility. A powerful siding nailer is more versatile than a less powerful model, as it easily drives different nail sizes and types into various materials.

17. Control

An easy-to-control and easy-to-use siding nailer will help you to do your task quickly and efficiently without any difficulty. Weight, size, ease to load magazine, selectable firing modes, jam clearing mechanism, and design are various things that affect the control option. If you want to use the nailer for long hours with less fatigue, then go with a lightweight model with having ergonomic handle design.

18. Extra Features

It is a must to have some extra features in a siding nailer to enhance its performance and for a safe and easy to use them. Here is the list of some additional features and we suggest you go through the list and pick the model with your required features.

  • No-Mar Rubber Nose – Also called foot, which avoids marking of nailer on the siding surface while operating this power tool.
  • Air Filter – Nailers with these filters will remove the dust and debris that is generated while nailing. So, it is an ideal addition, especially while dealing with several projects/tasks that involve causing a great amount of dust and debris.
  • Fastener Type – You can find different types of fasteners that range from wire to plastic. Some nail gun models let you use both types of fasteners, while some offer either of these types. You have to choose the correct type depending on your project requirement.
  • Bumper – Though it seems not a must-to-have feature, its presence will ensure that siding material (especially softer material) won’t get damaged while shooting the nails. So, it is an essential feature to check while buying siding nailers.
  • Multi-Layered Handle – It is a tiresome job to hold this siding nailer for a long time. So, a nailer with an extra layer of soft material (as padding) will absorb the shock your wrists have to tolerate when shooting nails into siding material.
  • Rubber Contact Tip – While installing the siding work, the nailer shooting into the material might damage it (not for initial nails, yet once you get experience). They won’t allow you to track every time you pressure the board. So, this rubberized tip feature is essential to absorb the shock easily while operating the nailer.
  • Rotating Air Intake – This feature is essential for those who move around the workspace, as this lets you turn around with ease. It prevents the tangling of the air intake hose and helps you to do your work aptly.
  • Comfort – Comfort is essential while using a tool for a longer time. We suggest you choose a nailer with a rubberized grip or ergonomic build. Also, check the options like compact, easy to load the magazine, adjustable drive depth, and comfortable handle grip to use the tool.
  • Firing Speed – The firing speed of the nailer will determine its productivity. Go with a nailer with a solid firing speed of 3 nails per second for quick completion of the work.
  • Maintenance-Free End Cap Filter –Don’t overlook this feature, as it prevents dust and debris from entering the nailer and thereby increases product durability. Also, it makes occasional tool cleaning much easier.

19. Brand

A product from well-established brands is the most preferred option as they mostly offer high-performance, best build quality, and amazing ease to use features. Some of these reputable brands for the siding nailers are DEWALT, BOSTITCH, Freeman, Makita, and Hitachi. You can purchase a nailer from any of these brands that come within your budget range.

Furthermore, these brands will offer longer warranties and replace/repair their product within the period, if any issues have been raised. So, it’s better to choose a product from the top brands to enjoy all these features (not in all cases, ensure to check the warranty and other terms & conditions).

20. Price

We suggest not to worry about the price of the product, instead consider the value it offers while using. Make sure to check several products that come within your budget range and pick the one that balances your requirement and budget.

21. Warranty

Apart from the build quality, you have to check the warranty offered by the nailer to make it use for a long time without any wear and tear. Most of these nail guns use aluminum housing due to their proper balance between build quality and strength.

The warranty duration offered by a siding nailer is essential to check, as they ensure that the given model is a durable and reliable one. While most options out there come with a 1-year, 3-year, or 5-year warranty, some more reliable options even come with a 7-year long warranty. A model with a longer warranty will offer peace of mind.

Also Check: Best Pin Nailer

Frequently Asked Questions

1. What is the main difference between a siding nailer and a roofing nailer?

Most people (especially beginners) get confused among these two types of nailers. Here are some points that differentiate between them and help you to choose the right option as per your needs.
* Roofing works such as nailing shingles are done by using roofing nailers, while siding works such as woodworking are done only with the help of siding nailers.
* Also, roofing nailers are a bit cheaper (costs less) than siding nailers.
* Irrespective of the smooth shanks and wider heads, you can easily remove the roofing nailer. Over time, you have to remove the shingle when it wears down. But that is not the case with siding nailers.
* Roofing coil nailers shoot nails with 1 ¾-inches length, which is shorter compared to siding nailers that drive nails up to 2 ½ inches. Thus, siding nails are longer and unsuitable for roofing (hard to remove nails).

 2. What’s the difference between wire-collated nails and plastic-collated nails?

Usually, plastic collated nails are lighter weight yet sturdier and tougher as wire collated nails. Though both these types are suitable for doing various projects like sheathing, framing, or fencing. In particular, the plastic nails are the best for face nailing, while wire collated one is ideal for Hardie siding.

3. Are there any cordless siding nailers available?

No, there won’t be cordless or battery-powered siding nailers available in the market. Almost all the modern siding nailers are pneumatic types that run by an air compressor.

4. Shall we use brad nailer instead of siding nailer for siding work?

No, brad nail gun doesn’t suit siding work. The nails used in the brad nailer are not strong enough to hold the material that we generally use in siding projects. They are used to doing small projects, such as upholstery.

5. Which one is considered the best to do the siding process?

Stainless aluminum is the most preferred and the best nails due to its tough and corrosion resistance for doing wood siding projects.

6. What is the difference between framing nailer and siding nailer?

Most people often compare the siding nailer with a framing nailer, because they look alike and are used interchangeably to perform similar tasks/works. But upon close observation, you will know that both are different tools and are designed to use for their specific purposes (even though nailing in confined spaces, yet siding nailer is mostly for upright.

However, you can differentiate them with their nail size – a framing nail gun easily accepts nails up to 3 ½-inch long, whereas a siding nailer with 1 ¼ – 2 ½ inches. Moreover, nails with a wider head are used for the siding process. Also, the framing nailers are heavier that weigh a maximum of 9 pounds, while siding nailers weigh up to 6 pounds.

7. What sort of nails do we regularly use for siding?

Since the siding won’t be nailed tightly, the nails used for this siding will differ from 1 – 2 ½ inches (or 3-inch in rare cases). However, you have to drive nails up to 3/4-inch into the base (if it is not up to the mark then the siding gets flimsy if deeper the integral might damage). A long nail is required for the installation of an additional material layer in between the base and siding.

So, it is essential to check the nail measurements before driving them from the siding nailer. All you need to remember is that each siding task/job is unique and need to choose the apt nails on the spot as per the specific siding requirement.

8. Shall we use a siding nail gun to do tasks other than siding?

Mostly, it depends. You should be aware that the siding nail gun is used to do other tasks as well. Small sort of works like fixing smaller repairs around the house can be done by using a siding nailer (when it features adjustable pressure), yet not heavy-duty nailing jobs like roofing.

9. Is it possible to do siding with other types of nail guns?

No, we don’t recommend you to use other nailers for siding work. Usually, a siding nail gun is specially designed to handle the pressure and particular nail size to do siding effectively without any damage or issues. Often some people use a roofing nail gun instead of a siding one, which is quite hard and difficult to use because the roofing nailer is more aggressive than the siding model.

10. What is meant by the degree associated with some nailers?

Generally, the degree of framing the nail gun is referred to as the angle of the magazine and the driving angle of the fastener. The degree of fastener and the degree of siding nailer has to be matched properly.

Plastic-insert collated stainless steel nails with 0-degree inserts offers the best corrosion resistance and abrasion. While you can use interior and non-exposure applications with 15-degree coil nails, where it has less corrosion. You can commonly find 15-degree siding nailers compared to 0-degree nailers. So, choose and use them as per your preference.

Conclusion

If you want tools for construction needs, then a siding nailer can be quite handy. While you can use some other nailer for sidings, these siding nailers can offer great precise results. Thus, we have mentioned some of the best siding nailers in this article, along with their major features and details. You can even find a detailed buying guide in this article that takes you through the various factors that you should keep in mind while buying such a siding nailer. But if you can’t choose one, consider one of these recommendations:

  • The Freeman PCN65 is the most reliable option in this article without having a premium price. It comes with a 7-year long warranty along with decent build quality. You can even expect pretty decent performance from it.
  • You should also consider the Bostitch N66C siding nailer as it has a high user rating because of its performance and features. It supports 1 ¼ inch to 2 ½ inch long. Just like the Freeman nailer, you also get a 7-year long warranty with it that is always great to have.
  • Metabo HPT’s NV65AH2 is another siding nailer that is quite powerful and reliable. It even offers a decent value for money to the user that is appreciated by a lot of users. You get an angle adjustment of up to 16 degrees while using it at your home or any other job site.

Make sure to share your thoughts in the comments section. You can also post any questions down there if you have any!

Leave a Reply

Your email address will not be published. Required fields are marked *