If you have passionate to design projects in electronics, purchasing the necessary parts and assembling them to make your dream crafts is the best way to get started.
So now you are all set to start a project and looking for electronic component kits?
When it comes to making a decision on the electronic component kit, you need to take some factors into account. First and foremost is what will you do with that kit? Are you going to build a project or make students learn through practical methods?
It is best to get an electronic kit that has elements like resistors, capacitors, diodes, LEDs, potentiometers and much more for making DIY crafts.
In this article, we have come up with 12 electronic component kits that deliver high performance.
Top Electronic Component Kits
12 Best Electronic Component Kit Reviews
1. Keywish Electronic Component Base Fun Kit
This kit is ideal for beginners and hobbyists with a simple configuration, low maintenance cost and control. All the components given this electronic fun are compatible with different circuit boards like Arduino and Raspberry Pi.
There are more than 200 pieces of hardware components and all of them are useful in designing projects. A user guide and UNO motherboard are not included in the kit.
The electronic components in the Key wish kit are as follows:
- Relay
- RGB LED
- Project box
- 40 Pin Header
- Diode (1N4007-10)
- Small resistor card
- Jumper wires (30)
- Potentiometer (10k-3)
- Breadboard (400 Holes-1)
- Resistor (1MΩ, 10MΩ-10)
- Transistor (PNP 8550-5)
- Transistor (NPN 8050-5)
- Photosensitive resistor (5)
- 20-pin F/M Dupont wires
- Active and passive buzzers
- Resistor(100Ω, 220Ω, 330Ω, 560Ω-10)
- Header caps (black, green, blue, red-2)
- LEDs (white, blue, red, green, orange-10)
- Resistor (1kΩ, 2kΩ, 4.7kΩ, 10kΩ, 20kΩ, 51kΩ-10)
- Electrolytic capacitor (22uf, 47uf ,100uf, 330uf, 100nf-5)
2. ZEBULON Electronic Components Kit
This kit contains 2200 pieces of electronic components that are assorted by professionals for professionals. All these components are carefully organized in a plastic storage which also helps in proper storage as well.
If you are a professional then you will love the assortment of components in this kit. We have mentioned them below for your reference.
- 250pcs capacitors
- 100pcs resistors
- 120pcs electrolytic caps (1uF,2.2uF,3.3uF,4.7uF,10uF,22uF,33uF,47uF,100uF,220uF,330uF,470uF)
- 120 pcs diodes (1n4007,1n4148,1n5819,1n5408,FR107,FR207,1n5399,1n5822)
- 120pcs inductors
- 15pcs crystal quartz
- 9pcs prototype PCBs
- 15pcs transistors
- 9pcs potentiometers
- 30pcs photoresistors
- 125pcs Zener
- Mini switches
- Trim pots
- Headers
- Terminals
3. Elenco CK-1000 Basic Electronic Parts Kit
The Elenco electronic kit is a great supplier for hobbyists, schools and engineering colleges. It makes the students to follow learning by doing approach to quickly grasp the complex theories.
The plastic toolbox has 18 compartments to place the electronic components. Teaching guidebook is also provided to make them learn the basic electronic components.
The list of components that helps to create a new project are:
- Diodes
- Inductor
- Displays
- Trim pots
- Switches
- DIP relay
- Hook up wire
- IC-555 timer
- Integrated circuit
- Operational amplifier
- 7-segment display (2)
- Electrolytic capacitors
- LEDs (red, green, yellow)
- Ceramic disc capacitors
- Capacitors (1uf,10uf,100uf,470uf,1000uf-10)
- Resistors (100Ω, 470Ω, 1kΩ,4.7kΩ, 10kΩ, 100kΩ, 220kΩ, 330kΩ, 470kΩ, 1MΩ-10)
4. Make: Electronics Component Pack 1 – Second Edition Kit
This kit is the best choice for beginners who are fascinated to learn electronics. A breadboard, potentiometer and Hook up wires are also included in the kit that serves as a base to become skilled at electronics. The double side long storage case has 30 sections to place the 125 pieces of electronic components in it.
Users book offers instructions to be followed while using electronic components in making DIY projects:
- Clips
- Blades
- Basic LEDs
- BJT transistors
- Hook up wire
- Toggle switches
- Loudspeaker (8Ω-1)
- Resistors and capacitors
- Solderless breadboard
- Battery connector (9V-1)
- Non-Latching relays (DPDT PCB)
- Linear and trimmer potentiometers
5. SunFounder Electronics Fun Kit
Rounding up all the components can be time taking and frustrating. For such people, this kit is the best choice. The starter kit has become popular among students-teachers that are being used in STEM programs for enhancing the concepts of electronics and Arduino.
The manual in the contains datasheet, circuit images, codes and explains about individual components, specifications and how to affix them on a breadboard. UNO board is not included in the kit.
You can also explore the functions of these tools with more creative ideas for smart projects.
Also Check: Electronics of Smart Cards
Sun founder starter kits include the components:
- Booklet
- Tilt Switch
- Photocell
- Button (10)
- Project box
- Photoresistor (2)
- 400 points Breadboard
- Thermistor
- RGB LED (1)
- Switches (5)
- Servo motor
- Jumper wires (65)
- Transistor (NPN/PNP)
- Active and passive buzzer
- Potentiometer with Knob
- Zener Diode
- LEDs (red, green, blue, yellow, white-10)
- Electrolytic Capacitor (100UF 50V-5, 10UF 50V-5)
- Resistor (100K, 10K, 5K, 2K, 1K, 330R, 220R, 100R, 10R, 1M-10)
- Ceramic Capacitor (10nF, 104nF-10)
Projects you can make with these electronic hardware components are listed below:
- Light alarm
- Flow of LED lights
- Automatic tracking light source
- Controlling LEDs by potentiometer
6. Molence DIY Electronics Components Kit
The next electronic component kit on our list is from a reliable brand called Molence. It contains 1818pcs of components that are helpful to every professional.
Below is a list of components available in this kit.
- 820PCS 1/4W 1% Metal Film Resistor
- 300PCS Ceramic Capacitors (50V)
- 120 PCS Aluminum Electrolytic Capacitor
- 180PCS TO-92 Transistor
- 100PCS 3mm LED
- 100PCS 5mm LED
- 100 PCS Diode
- 4PCS Prototype PCBs
7. Wayin Top Electronics Component Fun Kit
This is a complete electronic starter kit that is compatible with most DIY electronic projects like raspberry pi, Arduino, ESP8266, ESP32, etc. This kit is designed for beginners/DIY electronics enthusiasts and let you learn about various electronic components, circuit design, program design, electronic projects, PCB soldering, and so on.
This kit includes all the components required to meet the needs of your electronic circuit learning and design. These are made with high quality and reusable and they are easy to get started. The kit comes with Arduino tutorials and data sheet, which can be downloaded from the link given in box.
In this tutorial, it has 12 lessons and 95 pages that contains all information about programming, circuit design, soldering and circuit connection.
The list of components that helps to create a new project are:
- Breadboard
- Power Supply Module
- U-Shape Jumper Wires
- Solderless Jumper Wires
- 20-Pin Jumper Wires (F-M, F-F, M-M)
- Single – Sided PCB Board
- Double – Sided PCB Board
- Solder Wire
- Female Pin Header
- Male Pin Header
- RGB LED Emitting Diodes
- 5 MM LED’s (10XWhite, 10XRed, 10XBlue, 10XGreen, 10X Yellow)
- Resistors (10 pieces each of 10Ω, 100Ω, 220Ω, 470Ω, 1KΩ, 2KΩ, 4.7KΩ, 10KΩ, 47KΩ, 100KΩ, 470KΩ, 1MΩ)
- Battery Clip Connector
- 1-Bit Digital Tube LED Display
- 4 – Bits Digital Tube LED Display
- Ceramic Capacitor (3)
- Electrolytic Capacitor (2)
- 1N4007 Diode (2)
- 1N4148 Diode (2)
- S8050 Transistor (3)
- SS8550 Transistor (3)
- 2N2222 Transistor (3)
- 74HC595 Chip
- 4N35 Photocoupler
- NE555 Timer IC
- Photoresistor
- Thermistor
- Mini Tactile Push Button (10)
- Toggle Button (2)
- Tilt Switches
- Active Buzzer
- Passive Buzzer
- 5V 10A Relay
- Screw Terminal
- Potentiometer
8. Electronics Component Fun Kit
This electronic starter kit is perfect for everyone who wants to shape projects based on Arduino and Raspberry Pi. It comes with 500 pieces of various electronic components like resistors, capacitors, LEDs and ICs that are packed, labeled and placed individually in a plastic box.
A push switch is provided in the kit to turn the power on/off. Do not apply voltage higher than 9V.
It is not recommended to use for children below 13 years.
Beginners manual is placed in the toolkit that has following hardware electronic components:
- Sensors
- RGB LED (2)
- Thermistor (2)
- Power supply
- Jumper wires (65)
- USB Power cable
- 40-pin header (2)
- Photoresistor (2)
- Jumper wires (140)
- Transistor (NPN-10)
- Small buttons (10)
- F/M Dupont wires (20)
- Precision potentiometer
- Active and passive buzzers
- Diode Rectifier (1N4007-10)
- Breadboard (830 tie-points-1)
- Ceramic Capacitor (22PF, 100NF-10)
- Electrolytic capacitor (10uf, 100uf-10)
- LEDs (white, yellow, blue, green, red)
- Integrated circuit (4N35 and 74HC595)
- Resistor (10Ω, 100Ω, 220Ω, 330Ω, 1kΩ, 2kΩ, 5kΩ , 10kΩ , 100kΩ, 1MΩ-20)
9. Elegoo Upgraded Electronics Fun Kit
This wonderful upgraded electronic fun kit is a great start for newbies to learn about electronics and Arduino. It is a high performance, low maintenance cost kit with more than 300 pieces of components.
An instruction manual covers the topics like hardware components, resistor color coding, interfacing with other devices, data sheet, circuit diagrams and codes to make user understand the concepts quickly.
All the components given below in the kit are carefully bagged in a plastic box.
- RGB LED
- Buttons (10)
- Thermistor
- Potentiometer
- Jumper wires (65)
- 40-pin header (2)
- Photoresistor (2)
- Transistor (NPN-5)
- Solder-less wires (140)
- Dupont Wires (F/M-20)
- Diode rectifier (1N4007-5)
- Breadboard (830-pin holes)
- Active and passive buzzers
- Ceramic capacitor (22pf,104pf-10)
- Electrolytic capacitor (10uf,100uf-5)
- Integrated Circuits (IC-4N35 & 74HC595)
- LED (White, Yellow, Blue, Green, Red-10)
- Resistor (10Ω,100Ω, 220Ω, 330Ω,1kΩ,2kΩ,5kΩ,10kΩ, 100kΩ, 1MΩ-10)
10. Kuman Electronic Fans Bundle Learning Kit
Electronic learning kit includes all the necessary components to start with Arduino and Raspberry Pi.
Though UNO R3 board, user’s guide is not included in the kit, offers a resistance card. The components like LEDs, resistors, power supply, potentiometer, jumper wires helps to create your own fun projects.
Some other equipment available in the kit are:
- RGB LEDs
- Buttons (10)
- Plastic box
- Thermistor
- Power supply
- Potentiometer
- Resistance Card
- 40-pin header (2)
- Photoresistor (2)
- Jumper wires (65)
- Transistor (NPN-5)
- Active/ passive buzzer
- Dupont wires (F/M-20)
- Diode rectifier (1N4007-5)
- Breadboard (400 holes-1)
- Ceramic Capacitor (22pf-10)
- Integrated circuit (IC-74HC595)
- Electrolytic Capacitor (10uf,100uf-5)
- LED (red, white, blue, yellow, green-10)
- Resistor (10Ω, 100Ω, 220Ω, 330Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ,100kΩ, 1MΩ-10)
11. Elegoo Electronics Component Basic Starter Kit
More than 200 hundred components like transistors, resistor, capacitor and integrated circuits are present in the kit and all are 100% compatible with Arduino, Raspberry Pi motherboards.
The electronic component kit contains the following:
- RGB LED
- Thermistor
- Photoresistor (2)
- Transistor (NPN-5)
- Small button (10)
- Pin header (40pin-2)
- Precision potentiometer
- Diode Rectifier (1N4007-5)
- Active and passive buzzer
- Ceramic Capacitor (22pf, 104pf-10)
- Electrolytic capacitor (10uf, 100uf-5)
- Integrated circuit (IC 4N35 & 74HC595)
- LED (white, blue, yellow, green, red-10)
- Resistors (10Ω,100Ω, 220Ω, 330Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 100 kΩ, 1MΩ-10)
12. KeywishElectronics Basic Starter Kit
The basic starter kit is good for beginners and hobbyists to know about electronics and Arduino. Though the kit is very cheap, delivers high performance when connected together in a circuit board.
After finishing a project you can simply place the hardware components in a toolbox made up of plastic.
Basic electronic starter kit package includes:
- Relay
- Probes
- Power supply
- 40-pin header
- Battery (9V-1)
- Project box
- RGB LEDs (2)
- Big key (8)
- Small resistor card
- Jumper wires (65)
- Diode (1N4007-10)
- Active-passive buzzers
- Transistor (PNP/NPN-5)
- Dupont wires (F/M-20)
- Breadboard (400 holes-1)
- Photosensitive resistor (5)
- Adjustable potentiometers (10k-7)
- Header caps (red, blue, green, black-2)
- LEDs (white, red, green, orange, blue)
- Electrolytic capacitor (100pf, 100uf, 47uf, 22uf,330up, 100pf 100nf-5)
- Resistors (100Ω, 220Ω, 330Ω,560Ω, 1kΩ, 2kΩ, 4.7kΩ, 10kΩ, 20kΩ, 51kΩ, 1MΩ, 10MΩ-10)
Conclusion
The Keywish Electronic Component Base Fun Kit is our top priority form the list of 12 electronic components kits. This wonderful kit comprises of resistors, capacitors, buzzers, LEDs and many more hardware elements. For its low-maintenance cost and quality control many of the customers prefer to buy this product. Go and have a blast with this kit for crafting amazing fun projects.
For beginners, it’s a bit tricky to understand the hardware working concepts, real-time applications and the benefits of electronic components. To make it simple, we have provided “15 Best Electronic Books” for you.
One Response
Is there any book that describe the functionality of different electronics kit and if yes please can you send me to my email