If you are new to electronics or starting to build electronic circuits, then the important thing to do is to get familiar with few Basic Electronic Components and Equipment. Without understanding these basic electronic components i.e. their values, ratings, purpose etc. your circuit design might not function as expected. There are many electronic components like […]
Arduino DS3231 RTC Module Tutorial
In this project, I will discuss about DS3231 RTC Module, important components and features of this module and finally show you how to Interface a DS3231 Real Time Clock (RTC) Module with Arduino. Introduction Real Time Clock or RTC is a timekeeping device in the form of an Integrated Circuit or IC. RTC is an […]
Arduino MCP2515 CAN Bus Interface Tutorial
In this project, we will learn about the MCP2515 CAN Controller Module, how to interface the MCP2515 CAN Bus Controller with Arduino and finally how to enable communication between two Arduino board with the help of two MCP2515 CAN Controllers and the CAN Protocol. Introduction Controlled Area Network of simple CAN is a bus standard […]
POV Display using Arduino
In this project, I will show you how to build a simple POV Display using Arduino Nano. This POV Display Project can be modified to display any text on a rotating LED Display. There are few Spinning LED Display modules available in the market but I thought why not make one myself. This simple POV […]
Arduino Multitasking Tutorial
In this tutorial, we will learn about Multitasking in Arduino, how can we implement the concept of Arduino Multitasking, what are the factors we need to consider for Multitasking in Arduino and finally I will show you a simple project of multitasking. Before proceeding further with Arduino Multitasking tutorial, I strongly recommend you to refer […]
Arduino Millis Tutorial – Millis() the Delay Killer
In this tutorial, I will talk about the millis function in Arduino, how it works, what are its benefits and finally, how can we use Arduino Millis function efficiently to introduce the concept of Multitasking in Arduino. Traditional Programming Before I begin the Arduino Millis Tutorial, let me show a simple example circuit and […]
Temperature Controlled Switch using LM35, LM358
In this project, I will show you to design and implement an Automatic Temperature Controlled Switch using LM35 Temperature Sensor. This project / circuit can be used to automatically turn ON a switch when a desired temperature is detected. A Brief Note on Temperature Controlled Switch As the name suggests, a Temperature Controlled Switch […]
Frequency Divider Circuit using 555 and 4017
In this project, I will design a simple Frequency Divider Circuit using 555 Timer IC and CD4017 Counter IC. What is Frequency Divider? A Frequency Divider is a circuit that divides a given frequency by a factor of n, where n is an integer. For example, if the frequency of the Input signal to […]
Bluetooth Controlled Robot using Arduino
In this project, I will show you how to design and develop a Bluetooth Controlled Robot using Arduino, HC-05 Bluetooth Module and L298N Motor Driver Module. On the other end of the Bluetooth Communication, I will be using a Smart Phone and a simple Android App to control the Robotic Car. Introduction Robots are […]
HC-05 Bluetooth Module – Tutorial, Arduino Interface
In this project, we will learn about HC-05 Bluetooth Module, how to interface this Bluetooth Module with Arduino and how the HC-05 Bluetooth Module can be used for controlling the Arduino Board over Wireless Communication (Bluetooth). Introduction Bluetooth Communication is a 2.4GHz frequency based RF Communication with a range of approximately 10 meters. It […]